SUSPENSION SERVICE DATA

Vehicle Height (unloaded vehicle)
Model Front A - B Rear C - D
2WD 115.2 mm (4.54 in.) 34.9 mm (1.37 in.)
4WD 115.3 mm (4.54 in.) 33.8 mm (1.33 in.)
Wheel turning Angle (unloaded vehicle)
- Model Inside Wheel Outside Wheel Reference
Front wheel alignment 2WD 35°07' +/- 1°30' (35.12° +/- 1.5°) 31°20' (31.33°)
4WD 35°07' +/- 1°30' (35.12° +/- 1.5°) 31°20' (31.33°)
Toe-in
- Item Specified Condition
Front wheel alignment

Toe-in

(total)

C + D: 0°02' +/- 12' (0.04° +/- 0.2°)

B - A: 0.9 +/- 2 mm (0.04 +/- 0.08 in.)
Camber (unloaded vehicle)
- Model Camber Inclination Right-left difference
Front wheel alignment 2WD -0°38' +/- 45' (-0.63° +/- 0.75°) 45' (0.75°) or less
4WD -0°38' +/- 45' (-0.63° +/- 0.75°)
Caster (unloaded vehicle)
- Model Caster Inclination Right-left difference
Front wheel alignment 2WD 2°37' +/- 45' (2.62° +/- 0.75°) 45' (0.75°) or less
4WD 2°37' +/- 45' (2.62° +/- 0.75°)
Steering Axis Inclination (unloaded vehicle)
- Model Steering Axis Inclination Right-left difference
Front wheel alignment 2WD 11°01' +/- 45' (11.02° +/- 0.75°) 45' (0.75°) or less
4WD 11°01' +/- 45' (11.02° +/- 0.75°)
Turning torque
Turning torque
Front lower ball joint turning torque 0.7 to 4.5 N*m (7 to 46 kgf*cm, 6.2 to 40 in.*lbf)
Front stabilizer link ball joint turning torque 0.05 to 1.96 N*m (0.5 to 20 kgf*cm, 0.4 to 17 in.*lbf)
Toe-in (total)
- Item Model Specified Condition
Rear wheel alignment

Toe-in

(total)

 2WD

C + D: 0°10' +/- 0°12' (0.17° +/- 0.2°)

B - A: 3.0 +/- 2.0 mm (0.12 +/- 0.08 in.)

Toe-in

(total)

 4WD

C + D: 0°08' +/- 0°12' (0.14° +/- 0.2°)

B - A: 3.0 +/- 2.0 mm (0.12 +/- 0.08 in.)
Camber
- Model Specified Condition Right-left difference
Rear wheel alignment 2WD -1°00' +/- 45' (- 1.00° +/- 0.75°) 45' (0.75°) or less
4WD -0°36' +/- 45' (- 0.60° +/- 0.75°)
Turning torque
Turning torque
Rear stabilizer link ball joint turning torque 1.0 N*m (10 kgf*cm, 8.9 in.*lbf) or less