| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Bearing retainer plate x Generator drive end frame | 2.3 | 23 | 20 in.*lbf |
| Generator coil assembly x Generator drive end frame | 5.9 | 60 | 52 in.*lbf |
| Generator brush holder assembly x Generator coil assembly | 1.8 | 18 | 16 in.*lbf |
| Generator rear end cover x Generator coil assembly | 4.6 | 47 | 41 in.*lbf |
| Generator pulley with clutch x Generator rotor assembly ( ): For use with SST |
110 (84) |
1125 (857) |
81 (62) |
| Cylinder block x Wire harness clamp bracket | 20 | 204 | 15 |
| Generator assembly x Wire harness clamp bracket | 20 | 204 | 15 |
| Generator assembly x Cylinder block | 43 | 438 | 32 |
| Generator Wire x Terminal B | 9.8 | 100 | 87 in.*lbf |
| No. 2 oil level dipstick guide x Cylinder block | 21 | 214 | 15 |