BLOWER MOTOR CONTROLLER (for Rear) INSTALLATION


  1. INSTALL BLOWER MOTOR CONTROLLER


    1. A017D5P

      Install the blower motor controller with the 2 screws.

    2. Connect the connector.

  2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH


    1. Engage the 4 clips and 7 claws.

    2. Install the 2 clips.

    3. Install the deck trim side panel assembly RH with the 3 bolts.

      A017FTC

  4. INSTALL FRONT DECK SIDE TRIM COVER RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tech Tips

    Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.

  6. INSTALL ROPE HOOK ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  7. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH


    1. A017DDV

      Engage the 2 guides and 6 claws, and install the rear combination light service cover RH.

  8. INSTALL SIDE TRIM COVER RH (for Manual Air Conditioning System)


    1. A017CSI

      Engage the 4 claws, and install the side trim cover RH.

  9. INSTALL REAR ROOM TEMPERATURE SENSOR (for Automatic Air Conditioning System)


    1. Connect the connector.

    2. A017B3P

      Engage the 4 claws and install the rear room temperature sensor.

  10. INSTALL DECK SIDE TRIM RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  11. INSTALL DECK SIDE TRIM COVER NO.1

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  12. INSTALL REAR SEAT SIDE GARNISH CAP


    1. A017ER4

      Engage the guide and 6 claws.

    2. Install the rear seat side garnish cap with the screw.

  13. INSTALL REAR FLOOR FINISH PLATE


    1. A017BSY

      Engage the 4 clips and 4 claws, and install the rear floor finish plate.

  14. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here

  15. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH


    1. A017FFPE01

      Align the alignment mark (green) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip RH.

      Note

      After installation, check that the corners fit correctly.

  16. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.