Click here

REAR BLOWER MOTOR REMOVAL

Click here
Click here
  1. Click here

    REMOVE REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  2. Click here

    REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  3. Click here

    REMOVE DECK BOARD ASSEMBLY


    1. A017CPI

      Remove the deck board assembly.

  4. Click here

    REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY


    1. A017F31

      Disengage the 2 guides and remove the No. 3 deck board sub-assembly.

  5. Click here

    REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY


    1. A017D36

      Disengage the 2 guides and remove the No. 2 deck board sub-assembly.

  6. Click here

    REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover assembly.

  7. Click here

    REMOVE REAR SEAT SIDE COVER LH


    1. A017BBU

      Disengage the 2 clips and remove the rear seat side cover LH.

  8. Click here

    REMOVE DECK SIDE TRIM BOX LH


    1. A017BZVE01

      Remove the 2 deck side trim clips and clip.

    2. A017G2A

      Remove the deck side trim box LH as shown in the illustration.

  9. Click here

    REMOVE REAR SEAT SIDE COVER RH


    1. A017EH1

      Disengage the 2 clips and remove the rear seat side cover RH.

  10. Click here

    REMOVE JACK CARRIER SUPPORT

  11. Click here

    REMOVE JACK CARRIER CUSHION (for LHD)


    1. A017ENI

      Remove the jack carrier cushion.

  12. Click here

    REMOVE JACK CARRIER CUSHION (for RHD)


    1. A017D41

      Remove the jack carrier cushion.

  13. Click here

    REMOVE JACK ASSEMBLY (for LHD)


    1. A017EKS

      Remove the jack assembly.

  14. Click here

    REMOVE JACK ASSEMBLY (for RHD)


    1. A017DSX

      Remove the jack assembly.

  15. Click here

    REMOVE JACK CARRIER ASSEMBLY (for LHD)


    1. A017EAS

      Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.

  16. Click here

    REMOVE JACK CARRIER ASSEMBLY (for RHD)


    1. A017D6R

      Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.

  17. Click here

    REMOVE DECK SIDE TRIM BOX RH


    1. A017FOPE01

      Remove the 2 deck side trim clips and clip.

    2. A017E9B

      Remove the deck side trim box RH as shown in the illustration.

  18. Click here

    REMOVE REAR MAT


    1. A017F51

      Remove the rear mat.

  19. Click here

    REMOVE DECK FLOOR BOARD ASSEMBLY


    1. A017FMA

      Disengage the 3 claws.

    2. Remove the 2 nuts and the deck floor board assembly.

  20. Click here

    REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY


    1. A017GAE

      Remove the bolt and rear No. 2 seat inner belt assembly.

      Tip:

      Use the same procedure for the RH side and LH side.

  21. Click here

    DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY LH


    1. A017F2F

      Remove the bolt and disconnect the rear seat lap type belt assembly LH.

  22. Click here

    DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  23. Click here

    REMOVE REAR NO. 2 SEAT ASSEMBLY


    1. A017E5S

      Remove the 4 bolts and the rear No. 2 seat assembly.

  24. Click here

    REMOVE REAR FLOOR FINISH PLATE


    1. A017BSY

      Disengage the 4 clips and the 4 claws, and remove the rear floor finish plate.

  25. Click here

    REMOVE REAR SEAT SIDE GARNISH CAP


    1. A017FP0

      Remove the screw.

    2. Disengage the 6 claws and the guide, and remove the rear seat side garnish cap.

  26. Click here

    REMOVE DECK SIDE TRIM COVER NO.1

    Tip:

    Use the same procedure for the RH side and the LH side.

  27. Click here

    REMOVE DECK SIDE TRIM RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  28. Click here

    REMOVE SIDE TRIM COVER RH (for Manual Air Conditioning System)


    1. A017CSI

      Disengage the 4 claws and remove the side trim cover RH.

  29. Click here

    REMOVE REAR ROOM TEMPERATURE SENSOR (for Automatic Air Conditioning System)


    1. A017B3P

      Disengage the 4 claws and remove the rear room temperature sensor.

    2. Disconnect the connector.

  30. Click here

    REMOVE REAR COMBINATION LIGHT SERVICE COVER RH


    1. A017BZ2E01

      Using a screwdriver, disengage the 6 claws and the 2 guides, and remove the rear combination light service cover RH.

      Tip:

      Tape the screwdriver tip before use.

  31. Click here

    REMOVE ROPE HOOK ASSEMBLY (for RH Side)

    Tip:

    Use the same procedure for the RH side and the LH side.

  32. Click here

    REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tip:

    Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.

  33. Click here

    REMOVE FRONT DECK SIDE TRIM COVER RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  34. Click here

    REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH


    1. Remove the 3 bolts.

    2. Remove the 2 clips.

    3. A017FTC

      Disengage the 7 claws and 4 clips, and remove the deck trim side panel assembly RH.

  35. Click here

    REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  36. Click here

    REMOVE REAR BLOWER MOTOR SUB-ASSEMBLY


    1. A017ET4

      Disconnect the connector.

    2. Remove the 3 screws and the rear blower motor sub-assembly.