| DTC Code | DTC Name |
|---|---|
| C1511 | Torque Sensor Circuit Malfunction |
| C1512 | Torque Sensor Circuit Malfunction |
| C1513 | Torque Sensor Circuit Malfunction |
| C1514 | Torque Sensor Power Supply Abnormal |
DESCRIPTION
The torque sensor converts the rotation torque input from the steering wheel into electric signals and sends them to the power steering ECU.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1511 | Torque sensor (TRQ1) signal error or stop |
|
| C1512 | Torque sensor (TRQ2) signal error or stop | |
| C1513 | Deviation between torque sensor TRQ1 and TRQ2 exceeds specified value | |
| C1514 | Torque sensor power source voltage error |
INSPECTION PROCEDURE
PROCEDURE
CHECK CONNECTOR CONNECTION CONDITION (TORQUE SENSOR - POWER STEERING ECU)
Check the installation condition of the torque sensor connector.
| OK |
|---|
| Torque sensor connector is securely installed to the power steering ECU. |
| Result | ||||||
|---|---|---|---|---|---|---|
|
RECONFIRM DTC
Reinstall the torque sensor connector.
Check for DTCs (Click here).
| OK |
|---|
| DTC is not output. |
| Result | ||||||
|---|---|---|---|---|---|---|
|
CHECK TORQUE SENSOR
Turn the ignition switch on (IG).
Measure the voltage according to the value(s) in the table below.
| Standard voltage | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
END
REPLACE STEERING COLUMN ASSEMBLYClick here
REPLACE POWER STEERING ECUClick here