STEERING LOCK SYSTEM INITIALIZATION

Tech Tips

In vehicles equipped with the smart entry and start system, the starting function may not operate after recharging or while jump-starting a discharged battery. This condition is most common if the battery voltage drops below 9 V. The following procedure has been developed to address this condition.


  1. INITIALIZATION PROCEDURE

    A017GASE01

    1. Confirm that the SHORT fuse is installed.

      Tech Tips

      If the SHORT fuse is not installed, install it at this time.

    2. Move the shift lever to the N position.

    3. Turn the engine switch off.

    4. Open the driver's door.

      Tech Tips

      Opening the driver's door will start an initialization process between the steering lock ECU and the engine room junction block.

    5. Depress the brake pedal.

    6. Press the "START STOP" switch.