PARKING BRAKE CABLE REMOVAL


  1. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

    Tech Tips

    Refer to the instructions for REMOVAL of the parking brake pedal Click here.

  2. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY


    1. A017DP3

      Remove the adjusting nut.

    2. A017DJV

      Remove the clip.

    3. A017BHX

      Pull up the parking brake pedal claw and remove the No. 1 parking brake cable assembly.

  3. REMOVE REAR WHEEL

  4. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY (for 2WD)


    1. A017FLR

      Remove the 2 bolts and separate the rear disc brake caliper assembly.

      Note

      Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.

  5. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY (for 4WD)


    1. A017DLS

      Remove the 2 bolts and separate the rear disc brake caliper assembly.

      Note

      Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.

  6. REMOVE REAR DISC


    1. A017FKWE01

      Put matchmarks on the rear disc and the axle hub.

    2. A017DGC

      Release the parking brake and remove the rear disc.

      Tech Tips

      If the disc cannot be removed easily, turn and press firmly the shoe adjuster until the wheel comes free.

  7. REMOVE NO. 1 PARKING BRAKE SHOE RETURN TENSION SPRING


    1. A017DO5

      Remove the 2 No. 1 parking brake shoe return tension springs.

  8. SEPARATE NO. 1 PARKING BRAKE SHOE ASSEMBLY


    1. A017DZX

      Remove the No. 1 parking brake shoe hold down spring cup, parking brake shoe hold down spring and No. 2 parking brake shoe hold down spring cup, and separate the No. 1 parking brake shoe assembly from the backing plate.

  9. REMOVE PARKING BRAKE SHOE STRUT


    1. A017D5L

      Remove the parking brake shoe strut and the parking brake shoe strut compression spring.

  10. SEPARATE NO. 2 PARKING BRAKE SHOE ASSEMBLY


    1. A017BJJ

      Remove the No. 1 parking brake shoe hold down spring cup, parking brake shoe hold down spring and No. 2 parking brake shoe hold down spring cup, and separate the No. 2 parking brake shoe assembly from the backing plate.

  11. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET


    1. A017FWP

      Remove the parking brake shoe adjusting screw set.

  12. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY


    1. A017D1H

      Separate the No. 2 parking brake shoe return tension spring and remove the No. 1 parking brake shoe assembly.

  13. REMOVE NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING


    1. A017C8Y

      Remove the No. 2 parking brake shoe return tension spring from the No. 2 parking brake shoe assembly.

  14. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER


    1. A017B8B

      Using needle-nose pliers, separate the No. 3 parking brake cable assembly from the parking brake shoe lever as shown in the illustration.

      Note

      Be careful not to damage the No. 3 parking brake cable assembly.

  15. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A017FBA

      Remove the 2 bolts and separate the No. 3 parking brake cable assembly from the backing plate.

    2. Remove the 2 bolts, 4 nuts, and the No. 3 parking brake cable assembly.

      A017D24
  16. REMOVE CABLE SUPPORT BRACKET


    1. Remove the cable support bracket from the No. 3 parking brake cable assembly.

      A017BJ8
  17. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY


    1. A017B78

      Remove the 2 bolts and separate the No. 2 parking brake cable assembly from the backing plate.

    2. Remove the 2 bolts, 5 nuts, and the No. 2 parking brake cable assembly.

      A017CBV
  18. REMOVE PARKING BRAKE CABLE SUPPORT BRACKET


    1. Remove the parking brake cable support bracket from the No. 2 parking brake cable assembly.

      A017DPT
  19. REMOVE NO. 1 PARKING BRAKE CABLE SUPPORT BRACKET


    1. Remove the No. 1 parking brake cable support bracket from the No. 2 parking brake cable assembly.

      A017D3R