Click here

PARKING BRAKE CABLE REMOVAL

Click here
Click here
  1. Click here

    REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

    Tip:

    Refer to the instructions for REMOVAL of the parking brake pedal (Click here).

  2. Click here

    REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY


    1. A017DP3

      Remove the adjusting nut.

    2. A017DJV

      Remove the clip.

    3. A017BHX

      Pull up the parking brake pedal claw and remove the No. 1 parking brake cable assembly.

  3. Click here

    REMOVE REAR WHEEL

  4. Click here

    SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY (for 2WD)


    1. A017FLR

      Remove the 2 bolts and separate the rear disc brake caliper assembly.

      Note:

      Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.

  5. Click here

    SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY (for 4WD)


    1. A017DLS

      Remove the 2 bolts and separate the rear disc brake caliper assembly.

      Note:

      Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.

  6. Click here

    REMOVE REAR DISC


    1. A017FKWE01

      Put matchmarks on the rear disc and the axle hub.

    2. A017DGC

      Release the parking brake and remove the rear disc.

      Tip:

      If the disc cannot be removed easily, turn and press firmly the shoe adjuster until the wheel comes free.

  7. Click here

    REMOVE NO. 1 PARKING BRAKE SHOE RETURN TENSION SPRING


    1. A017DO5

      Remove the 2 No. 1 parking brake shoe return tension springs.

  8. Click here

    SEPARATE NO. 1 PARKING BRAKE SHOE ASSEMBLY


    1. A017DZX

      Remove the No. 1 parking brake shoe hold down spring cup, parking brake shoe hold down spring and No. 2 parking brake shoe hold down spring cup, and separate the No. 1 parking brake shoe assembly from the backing plate.

  9. Click here

    REMOVE PARKING BRAKE SHOE STRUT


    1. A017D5L

      Remove the parking brake shoe strut and the parking brake shoe strut compression spring.

  10. Click here

    SEPARATE NO. 2 PARKING BRAKE SHOE ASSEMBLY


    1. A017BJJ

      Remove the No. 1 parking brake shoe hold down spring cup, parking brake shoe hold down spring and No. 2 parking brake shoe hold down spring cup, and separate the No. 2 parking brake shoe assembly from the backing plate.

  11. Click here

    REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET


    1. A017FWP

      Remove the parking brake shoe adjusting screw set.

  12. Click here

    REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY


    1. A017D1H

      Separate the No. 2 parking brake shoe return tension spring and remove the No. 1 parking brake shoe assembly.

  13. Click here

    REMOVE NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING


    1. A017C8Y

      Remove the No. 2 parking brake shoe return tension spring from the No. 2 parking brake shoe assembly.

  14. Click here

    REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER


    1. A017B8B

      Using needle-nose pliers, separate the No. 3 parking brake cable assembly from the parking brake shoe lever as shown in the illustration.

      Note:

      Be careful not to damage the No. 3 parking brake cable assembly.

  15. Click here

    REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A017FBA

      Remove the 2 bolts and separate the No. 3 parking brake cable assembly from the backing plate.

    2. A017D24

      Remove the 2 bolts, 4 nuts, and the No. 3 parking brake cable assembly.

  16. Click here

    REMOVE CABLE SUPPORT BRACKET


    1. A017BJ8

      Remove the cable support bracket from the No. 3 parking brake cable assembly.

  17. Click here

    REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY


    1. A017B78

      Remove the 2 bolts and separate the No. 2 parking brake cable assembly from the backing plate.

    2. A017CBV

      Remove the 2 bolts, 5 nuts, and the No. 2 parking brake cable assembly.

  18. Click here

    REMOVE PARKING BRAKE CABLE SUPPORT BRACKET


    1. A017DPT

      Remove the parking brake cable support bracket from the No. 2 parking brake cable assembly.

  19. Click here

    REMOVE NO. 1 PARKING BRAKE CABLE SUPPORT BRACKET


    1. A017D3R

      Remove the No. 1 parking brake cable support bracket from the No. 2 parking brake cable assembly.