REAR BRAKE FLEXIBLE HOSE REMOVAL

Note

If both the RH side hose and LH side hose are disconnected at the same time, be sure to place identification marks indicating the position on each side.

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. DRAIN BRAKE FLUID

  2. REMOVE REAR WHEEL

  3. REMOVE REAR FLEXIBLE HOSE


    1. A017BOU

      Remove the union bolt and gasket, and separate the rear flexible hose.

    2. A017EDFE01

      Using a union nut wrench (10 mm), disconnect the brake line while holding the rear flexible hose with a wrench.

      Note


      • Do not bend or damage the brake line.

      • Do not allow any foreign matter such as dirt and dust to enter the brake line.

    3. Remove the clip.

    4. A017CF8E01

      Remove the bolt and rear flexible hose from the absorber bracket.