FRONT BRAKE FLEXIBLE HOSE REMOVAL

Note

If both the RH side hose and LH side hose are disconnected at the same time, be sure to place identification marks indicating the position on each side.

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. DRAIN BRAKE FLUID

  2. REMOVE FRONT WHEEL

  3. REMOVE FRONT FLEXIBLE HOSE


    1. A017CT6

      Remove the union bolt and gasket, and separate the front flexible hose.

    2. A017FT1E01

      Using a union nut wrench (10 mm), disconnect the brake line from the front flexible hose while holding the front flexible hose with a wrench.

      Note


      • Do not bend or damage the brake line.

      • Do not allow any foreign matter such as dirt and dust to enter the brake lines.

    3. A017CI0

      Remove the clip.

    4. A017CY5

      Remove the bolt and front flexible hose from the absorber bracket.