VSC OFF SWITCH INSPECTION


  1. INSPECT VSC OFF SWITCH


    1. A017FE6E04

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      3 - 6 Switch is not pushed in 10 kΩ or higher
      3 - 6 Switch is pushed in Below 25 Ω

      If the result is not as specified, replace the switch.

    2. Check the illumination operation.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      4 - 5 Battery's positive (+) lead connected to terminal 5 and negative (-) lead to terminal 4 LED illuminates

      If the result is not as specified, replace the switch.