VEHICLE STABILITY CONTROL SYSTEM, Diagnostic DTC:C1440

DESCRIPTION

If the skid control ECU determines that the vehicle is being driven at a steep bank angle, the skid control ECU stores DTC C1440 while VSC operation is temporarily disabled.

It is not a malfunction if the system and sensor circuits are normal and if the normal VSC operation resumes.

INSPECTION PROCEDURE

PROCEDURE

1. Click here

   CHECK DTC

   
   

   1. Clear the DTCs (Click here).

   2. Perform a road test.

   3. Check if the same DTC is recorded (Click here).

      Result
      Result Proceed to DTC (C1440) is output A DTC (C1440) is not output B Yaw rate and acceleration sensor DTC is output C

   
   
   • AClick here
   • BClick here
   • CClick here
2. Click here

   CLEAR DTC

   
   

   1. Clear the DTCs (Click here).

      Tip:
      

      • If the skid control ECU determines that the vehicle is being driven at a steep bank angle, the skid control ECU stores DTC C1440 while VSC operation is temporarily disabled.

      • It is not a malfunction if the system and sensor circuits are normal and if the normal VSC operation resumes.

   
   
   • NEXTClick here
3. Click here

   END

4. Click here

   REPAIR CIRCUIT INDICATED BY OUTPUT DTCClick here