TIRE AND WHEEL SYSTEM INSPECTION


  1. INSPECT TIRE


    1. Check the tires for wear and proper inflation pressure.

      Cold tire inflation pressure
      Tire size

      Front kPa (kgf/cm2, psi)

      Rear kPa (kgf/cm2, psi)

      245/55R19 103S

      245/55R19 103H

      245/65R17 105S

      245/65R17 105H

      		 4 passengers or less

      210 (2.1, 30)*1

      220 (2.2, 32)*2

      210 (2.1, 30)*1

      220 (2.2, 32)*2

      5 passengers or more

      210 (2.1, 30)*1

      220 (2.2, 32)*2

      230 (2.3, 33)*1

      240 (2.4, 35)*2

      *1: For diving under 160 km/h (100 mph)

      *2: For driving at 160 km/h (100 mph) or over

    2. A017CW9

      Using a dial indicator, check the runout of the tires.

      Tire runout
      1.4 mm (0.055 in.) or less

  2. ROTATE TIRES


    1. A017DJPE01

      Rotate the tires as shown in the illustration.

  3. INSPECT WHEEL BALANCE


    1. A017CVWE05

      Check and adjust the off-the-car balance.

      Imbalance after adjustment
      8.0 g (0.018 lb.) or less

      Note


      • Remove dirt, oil, and water from the surface where the balance weight is to be adhered with a cleaning detergent.

      • Do not touch the sticking surface of the tape.

      • Adhere the sticking type balance weight to the flat position shown in the illustration.

      • Push the balance weight securely with a finger to adhere it to the indicated position.

      • Do not reuse balance weights.

      Tech Tips


      • The inner side balance weight should be installed by clipping it to the rim.

      • If necessary, check and adjust the on-the-car balance.

  4. INSPECT FRONT AXLE HUB BEARING LOOSENESS

    Tech Tips

    Click here.

  5. INSPECT REAR AXLE HUB BEARING LOOSENESS (for 2WD)

    Tech Tips

    Click here.

  6. INSPECT REAR AXLE HUB BEARING LOOSENESS (for 4WD)

    Tech Tips

    Click here.

  7. INSPECT FRONT AXLE HUB RUNOUT

    Tech Tips

    Click here.

  8. INSPECT REAR AXLE HUB RUNOUT (for 2WD)

    Tech Tips

    Click here.

  9. INSPECT REAR AXLE HUB RUNOUT (for 4WD)

    Tech Tips

    Click here.