ESCAPE HAMMER INSPECTION


  1. INSPECT BACK WINDOW GLASS HAMMER ASSEMBLY

    A01BGP7E01
    Text in Illustration
    *1 Switch
    *2 Lever
    *a

    Component without harness connected

    (Back Window Glass Hammer Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2

      Switch on

      (Lever pushed)

      		 Below 1 Ω
      1 - 2

      Switch off

      (Lever not pushed)

      		 10 kΩ or higher

      If the result is not as specified, replace the back window glass hammer assembly.