ROOF HEADLINING (for Full-trim) REMOVAL


  1. DISCONNECT BATTERY NEGATIVE CABLE

  2. REMOVE REAR NO. 1 SEAT ASSEMBLY


    1. A01BDBC

      First row:


      1. Remove the 3 bolts, nut and rear No.1 seat assembly.

    2. A01BI53

      Second row:


      1. Remove the 2 bolts, 2 nuts and rear No.1 seat assembly.

  3. REMOVE REAR NO. 2 SEAT ASSEMBLY


    1. A01BFKN

      Remove the 4 bolts, 2 nuts and rear No.2 seat assembly.

      Tech Tips


      • Use the same procedure for the second row.

      • Use the same procedure for the third row.

  4. REMOVE REAR NO. 3 SEAT ASSEMBLY


    1. A01BCP7

      Remove the 6 bolts, 2 nuts and rear No.3 seat assembly.

  5. REMOVE REAR NO. 4 SEAT ASSEMBLY


    1. A01BDT2

      Remove the 3 bolts and 2 nuts.

    2. Pull the lever in the direction indicated by the arrow in the illustration, release the 2 locks, and remove the rear No.4 seat assembly.

  6. REMOVE REAR SEAT BELT ASSEMBLY OUTER


    1. A01BF9V

      Remove the bolt and disconnect the floor side of rear seat belt assembly outer.

    2. A01BEOJ

      Using a screwdriver, disengage the 4 claws and disconnect the shoulder side cover of the rear seat belt assembly outer.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01BFZ5

      Disconnect the bolt and shoulder side the rear seat belt assembly outer.

    4. A01BDAM

      Disconnect the bolt and remove the rear seat belt assembly outer.

    5. for Rear No. 1 Seat Bench Seat Type:


      1. A01BI1V

        Remove the bolt and disconnect the floor side of the rear seat belt assembly outer.

      2. A01BH1T

        Using a screwdriver, disengage the 2 claws and disconnect the shoulder side cover of the rear seat belt assembly outer.

        Tech Tips

        Tape the screwdriver tip before use.

      3. A01BB4S

        Remove the bolt and disconnect the shoulder side of the rear seat belt assembly outer.

      4. A01BEHE

        Loosen the bolt.

      5. Disengage the 2 claws and disconnect the retractor cover of the rear seat belt assembly outer.

      6. A01BAOQ

        Remove the upper side bolt.

      7. Loosen the lower side bolt and remove the rear seat belt assembly outer.

  7. REMOVE REAR NO.2 SEAT BELT ASSEMBLY OUTER LH


    1. A01BFZF

      Remove the bolt and disconnect the floor side of the rear No.2 seat belt assembly outer.

    2. A01BGW6

      Using a screwdriver, disengage the 2 claws and disconnect the shoulder side cover of the rear No.2 seat belt assembly outer.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01BACW

      Remove the bolt and disconnect the shoulder side of the rear No.2 seat belt assembly outer.

    4. A01BCQQ

      Remove the bolt and remove the rear No.2 seat belt assembly outer.

  8. REMOVE NO.3 SEAT BELT ASSEMBLY OUTER LH


    1. A01BHKL

      Remove the bolt and disconnect the floor side of the rear No.3 seat belt assembly outer.

    2. A01BEOL

      Using a screwdriver, disengage the 4 claws and disconnect the shoulder side cover of the rear No.3 seat belt assembly outer.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01BCWA

      Disconnect the bolt and shoulder side of the rear No.3 seat belt assembly outer.

    4. A01BE7O

      Using a screwdriver, disengage the 4 claws and disconnect the rear No.3 seat belt assembly outer retractor cover.

    5. A01BCED

      Remove the bolt and rear No.3 seat belt assembly outer.

  9. REMOVE NO.4 SEAT BELT ASSEMBLY OUTER LH


    1. A01BBPR

      Remove the bolt and disconnect the floor side of the rear No.4 seat belt assembly outer.

    2. A01BCNU

      Using a screwdriver, disengage the shoulder side cover of the 2 claws and disconnect the rear No.4 seat belt assembly outer.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01BGFF

      Remove the bolt and disconnect the shoulder side of the rear No.4 seat belt assembly outer.

    4. A01BHXU

      Using a screwdriver, disengage the 4 claws and disconnect the rear No.4 seat belt assembly outer retractor cover.

    5. A01BAOA

      Remove the bolt and rear No.4 seat belt assembly outer.

  10. REMOVE FRONT DOOR SCUFF PLATE LH


    1. A01BGMI

      Remove the 5 clips and front door scuff plate LH.

  11. REMOVE FRONT DOOR SCUFF PLATE RH

  12. REMOVE FRONT DOOR OPENING TRIM LH

  13. REMOVE FRONT DOOR OPENING TRIM RH

  14. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH


    1. A01BF0I

      Remove the bolt and disconnect front seat outer belt assembly RH.

    2. A01BAR9E01

      Using a screwdriver, disengage the 2 claws and cover.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01BGXI

      Remove the bolt and disconnect front seat outer belt assembly RH.

  15. REMOVE CENTER PILLAR GARNISH COVER LOWER LH


    1. A01BBOJE01

      Using a screwdriver, disengage the 4 clips and remove the center pillar garnish lower LH.

  16. REMOVE SEAT ASSEMBLY LH


    1. Disconnect connector.

    2. A01BAVH

      Remove the nut and 3 bolts.

    3. Remove the seat assembly LH.

  17. REMOVE SEAT BELT ANCHOR COVER


    1. A01BB5PE01

      Remove the 2 clips.

    2. Disengage the claw and then remove the seat belt anchor cover.

  18. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH


    1. A01BAV9

      Remove the bolt and disconnect the front seat outer belt assembly LH.

    2. A01BA80E01

      Using a screwdriver, disengage the 2 claws and cover.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01BF4Z

      Remove the bolt and disconnect the front seat outer belt assembly LH.

  19. REMOVE REAR DOOR SCUFF PLATE RH


    1. A01BAVP

      Using a screwdriver, disengage the 11 clips and remove the rear door scuff plate LH.

      Tech Tips

      Tape the screwdriver tip before use.

  20. REMOVE SLIDE DOOR WEATHERSTRIP NO.1 RH

  21. REMOVE BACK DOOR SCUFF PLATE


    1. A01BBWNE01

      Using a screwdriver, disengage the 7 clips and 4 claws and remove the back door scuff plate.

      Tech Tips

      Tape the screwdriver tip before use.

  22. REMOVE BACK DOOR WEATHERSTRIP

  23. REMOVE QUARTER TRIM PANEL ASSEMBLY REAR LH (Middle Roof Type)


    1. A01BHB3

      Using a screwdriver, disengage the 21 clips and remove the quarter trim panel assembly rear LH.

      Tech Tips

      Tape the screwdriver tip before use.

  24. REMOVE QUARTER TRIM PANEL ASSEMBLY REAR LH (High Roof Type)


    1. A01BFM6

      Using a screwdriver, disengage the 35 clips and remove the quarter trim panel assembly rear LH.

      Tech Tips

      Tape the screwdriver tip before use.

  25. REMOVE QUARTER TRIM PANEL ASSEMBLY REAR RH

  26. REMOVE SIDE NO.1 TRIM ASSEMBLY LH


    1. A01BFUT

      Using a screwdriver, disengage the 21 clips and remove the side No.1 trim assembly LH.

      Tech Tips

      Tape the screwdriver tip before use.

  27. REMOVE ENGINE SERVICE HOLE COVER HOOK NO.2 LH


    1. A01BBRY

      Remove the screw and engine service hole cover hook No.2 LH.

  28. REMOVE CENTER PILLAR GARNISH LH


    1. A01BE1W

      Using a screwdriver, disengage the 5 clips and 2 claws, and remove the center pillar garnish LH.

      Tech Tips

      Tape the screwdriver tip before use.

  29. REMOVE ASSIST GRIP PLUG


    1. A01BC0Y

      Using a screwdriver, disengage the assist grip plugs.

      Tech Tips

      Tape the screwdriver tip before use.

  30. REMOVE ASSIST GRIP ASSEMBLY REAR


    1. A01BD7L

      Remove the 2 screws and assist grip assembly rear.

  31. REMOVE CENTER PILLAR GARNISH LOWER RH


    1. A01BDYB

      Release the 4 claws and remove the center pillar garnish lower RH.

  32. REMOVE CENTER PILLAR GARNISH RH


    1. A01BC8O

      Release the 3 clips, claw and remove the center pillar garnish RH.

  33. REMOVE QUARTER PILLAR GARNISH LH (High Roof Type)


    1. A01BFP3E02

      Release the 6 clips and remove the quarter pillar garnish LH.

  34. REMOVE QUARTER PILLAR GARNISH RH (High Roof Type)

  35. REMOVE QUARTER PILLAR GARNISH LH (Middle Roof Type)


    1. A01BFSR

      Release the 3clips and remove the quarter pillar garnish LH.

  36. REMOVE QUARTER PILLAR GARNISH RH (Middle Roof Type)

  37. REMOVE ROOF SIDE GARNISH INNER UPPER LH


    1. A01BCRQ

      Using a screwdriver, disengage the 6 clips and remove the roof side garnish inner upper LH.

      Tech Tips

      Tape the screwdriver tip before use.

  38. REMOVE ROOF SIDE GARNISH INNER UPPER RH

  39. REMOVE REAR SEAT HOOK (Space Up Seat)


    1. A01BG06

      Remove the bolt and rear seat hook.

  40. REMOVE ROOM LIGHT ASSEMBLY NO.2 (Deluxe)


    1. A01BCQR

      Using a screwdriver, disengage the 4 claws and remove the room light lens cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01BG0A

      Remove the 2 screws.

    3. Disconnect the connector and remove the room light assembly No.2.

  41. REMOVE ROOM LIGHT ASSEMBLY NO.2 (Super Wagon)


    1. A01BA8B

      Using a screwdriver, disengage the claw and remove the room light base.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Remove the 2 screws.

    3. A01BD2XE01

      Pull the room light assembly No.2 rearward and disengage the claw.

    4. Release the connector and remove the room light assembly No.2.

  42. REMOVE ROOF HEADLINING NO.2 (Middle Roof Type)


    1. A01BEDBE01

      Using a clip remover, disengage the 20 clips and remove the roof headlining No.2.

      Tech Tips

      The clips in the illustration are part of the components. Remove them together with the roof headlining No.2.

  43. REMOVE ROOF HEADLINING NO.2 (High Roof Type)


    1. A01BDH1E01

      Using a clip remover, disengage the 26 clips and remove the roof headlining No.2.

      Tech Tips

      The clips in the illustration are part of the components. Remove them together with the roof headlining No.2.

  44. REMOVE FRONT ASSIST GRIP PLUG NO.1


    1. A01BGF8

      Using a screwdriver, disengage the assist grip plug No.1.

      Tech Tips


      • Tape the screwdriver tip before use.

      • Use the same procedures described for the RH side.

  45. REMOVE ASSIST GRIP ASSEMBLY


    1. A01BDF5

      Remove the 2 screws and assist grip.

      Tech Tips

      Use the same procedures described for the RH side.

  46. REMOVE FRONT PILLAR GARNISH LH


    1. A01BHII

      Using a screwdriver, disengage the clip and claw and remove the front pillar garnish LH.

      Tech Tips

      Tape the screwdriver tip before use.

  47. REMOVE FRONT PILLAR GARNISH RH

  48. REMOVE ASSIST GRIP


    1. A01BGK9E01

      Using a screwdriver, disengage the assist grip plugs.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01BDOY

      Remove the 2 screws and assist grip.

  49. REMOVE VISOR HOLDER


    1. A01BDBA

      Remove the screw.

    2. Using a moulding remover, disengage the claw and remove the visor holder.

      Tech Tips

      Use the same procedures described for the RH side.

  50. REMOVE VISOR ASSEMBLY LH


    1. A01BB5I

      Remove the 2 screws and visor assembly LH.

  51. REMOVE VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  52. REMOVE ROOM LIGHT ASSEMBLY NO.1 (Deluxe)


    1. A01BCQR

      Using a screwdriver, disengage the 4 claws and remove the room light lens cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01BG0A

      Remove the 2 screws.

    3. Disconnect the connector and remove the room light assembly No.1.

  53. REMOVE MAP LIGHT ASSEMBLY (Super Wagon)


    1. A01BAKAE01

      Using a moulding remover, disengage the 4 claws and map light assembly.

    2. Disconnect the connector and remove the map light assembly.

  54. REMOVE REAR COOLER CONTROL PANEL (w/Rear Cooler)

  55. REMOVE ROOF HEADLINING NO.1 (Middle Roof Type)


    1. A01BEWOE02

      w/ Rear Cooler:

      Remove the 4 screws.

    2. Using a clip remover, disengage the 9 clips and remove the roof headlining No.1.

      Tech Tips

      The clips in the illustration are part of the components. Remove them together with the roof headlining No.1

  56. REMOVE ROOF HEADLINING NO.1 (High Roof Type)


    1. A01BDPHE02

      w/ Rear Cooler:

      Remove the 4 screws.

    2. Using a clip remover, disengage the 15 clips and remove the roof headlining No.1.

      Tech Tips

      The clips in the illustration are part of the components. Remove them together with the roof headlining No.1.