BACK DOOR OUTSIDE GARNISH INSTALLATION


  1. INSTALL LICENSE PLATE LIGHT ASSEMBLY


    1. Install the 2 license plate lights to the back door outside garnish.

    2. Attach the 2 wire harness clamps and install the 2 screws.

  2. INSTALL BACK DOOR OUTSIDE GARNISH


    1. A01BEPH

      Install the grommet and back door outside garnish.

    2. A01BG5IE01

      Install the 2 clips.

    3. Install the back door outside garnish with the 5 nuts.

    4. Connect the connector.

  3. INSTALL BACK DOOR TRIM BOARD (for Board)


    1. A01BD78E01

      Engage the 18 clips and install the back door trim board.

  4. INSTALL BACK DOOR TRIM BOARD (for Molded Door Trim)


    1. A01BA72

      Install the back door trim board with the 16 clips.

  5. INSTALL BACK DOOR PULL STRAP (w/ Strap)


    1. A01BAZ0

      Install the back door pull strap with the screw.

  6. INSTALL BACK DOOR INSIDE HANDLE BEZEL (w/ Back Door Inside Handle Bezel)


    1. A01BHK4

      Install the back door inside handle bezel with the 2 screws.

  7. INSTALL BACK DOOR INSIDE HANDLE (w/ Back Door Inside Handle)


    1. A01BDEV

      Install the back door inside handle with the screw.