BACK DOOR OUTSIDE GARNISH REMOVAL


  1. REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY (w/ Back Door Inside Handle)


    1. A01BDEV

      Remove the screw and the back door inside handle.

  2. REMOVE BACK DOOR INSIDE HANDLE BEZEL (w/ Back Door Inside Handle Bezel)


    1. A01BHK4

      Remove the 2 screws and the back door inside handle bezel.

  3. REMOVE BACK DOOR TRIM BOARD (DX Grade)


    1. A01BA72

      Using a clip remover, remove the 16 clips and the back door trim board.

  4. REMOVE BACK DOOR TRIM BOARD (GL Grade)


    1. A01BD78E01

      Using a clip remover, remove the 18 clips and the back door trim board.

  5. REMOVE BACK DOOR OUTSIDE GARNISH


    1. Disconnect the connector.

    2. Remove the 5 nuts.

    3. A01BG5IE01

      Release the 2 clips and back door garnish outside.

    4. A01BEPH

      Remove the grommet and back door garnish outside.

  6. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    1. A01BGKVE01

      Remove the 2 screws and the 2 clamps.

    2. Remove the license plate light assembly as shown in the illustration.