REAR BUMPER REASSEMBLY


  1. INSTALL REAR BUMPER COVER UPPER LH

  2. INSTALL REAR BUMPER COVER UPPER RH

  3. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH


    1. A01BBV3E02

      Connect the connector.

    2. Install the rear combination light assembly with the 2 screws and the 2 pins.

  4. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH

  5. INSTALL REAR BUMPER SIDE SUPPORT NO.2 LH

  6. INSTALL REAR BUMPER SIDE SUPPORT NO.2 RH

  7. INSTALL REAR BUMPER BRACKET CENTER

  8. INSTALL BACK STEP SUB-ASSEMBLY (w/ Back Step)

  9. INSTALL NO. 1 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)


    1. Attach the 4 clamps to install the No. 1 luggage room wire.

  10. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensor retainers.


    1. A01BAIKE01
      Text in Illustration
      *1 Keyhole

      Align the keyhole and protrusion as shown in the illustration.

    2. A01BAGS

      Attach the 4 claws to install the No. 1 ultrasonic sensor retainer.

      Note

      Do not damage the bumper cover with the protrusion when installing the retainer.

  11. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Tech Tips

    Use the same procedure for both No. 2 ultrasonic sensor retainers.


    1. A01BDE8E01
      Text in Illustration
      *1 Keyhole

      Align the keyhole and protrusion as shown in the illustration.

    2. A01BBQ5

      Attach the 4 claws to install the No. 1 ultrasonic sensor retainer.

      Note

      Do not damage the bumper cover with the protrusion when installing the retainer.

  12. INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensors.


    1. A01BFC8

      Attach the 2 claws to install the No. 1 ultrasonic sensor.

  13. INSTALL NO. 2 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Tech Tips

    Use the same procedure for both No. 2 ultrasonic sensors.


    1. A01BFC8

      Attach the 2 claws to install the No. 1 ultrasonic sensor.