REAR BUMPER DISASSEMBLY


  1. REMOVE ULTRASONIC SENSOR RETAINER NO.1 (w/ Clearance Sonar)


    1. Disconnect the connector.

    2. A01BFS4

      Remove the ultrasonic sensor retainer No.1 as shown in the illustration.

  2. REMOVE ULTRASONIC SENSOR NO.1 (w/ Clearance Sonar)


    1. Remove the No.1 ultrasonic sensor.

  3. REMOVE ULTRASONIC SENSOR NO.2 (w/ Clearance Sonar)


    1. Remove the No.2 ultrasonic sensor.

  4. REMOVE BACK STEP SUB-ASSEMBLY


    1. A01BA5H

      Remove the 5 bolts and back step sub-assembly.

  5. REMOVE REAR BUMPER BRACKET CENTER


    1. A01BGN8

      Remove the 4 bolts and 4 rear bumper bracket centers.

  6. REMOVE REAR BUMPER SIDE SUPPORT NO.2 LH


    1. A01BCYXE02

      Remove the 2 screws.

    2. Release the 2 grommet and remove the rear bumper side support No.2 LH.

  7. REMOVE REAR BUMPER SIDE SUPPORT NO.2 RH

  8. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH


    1. A01BBV3E01

      Remove the 2 screws.

    2. Pull in the direction indicated by the arrow, disengage the 2 pins and separate the rear combination light assembly.

    3. Disconnect the connector and remove the rear combination light assembly.

  9. REMOVE REAR COMBINATION LIGHT ASSEMBLY RH

  10. REMOVE REAR BUMPER COVER UPPER LH


    1. A01BCMPE02

      Remove the screw.

    2. Release the clip and 3 claws and remove the rear bumper cover upper.

  11. REMOVE REAR BUMPER COVER UPPER RH