ROOF HEADLINING (w/ Roof Window Glass) INSTALLATION


  1. INSTALL NO. 1 ROOF HEADLINING


    1. A01BBMX

      Install the No. 1 roof headlining with the clips.

  2. INSTALL VISOR HOLDER


    1. A01BHRS

      Engage the claw and install the visor holder.

    2. Tighten the screw.

      Tech Tips

      Use the same procedure for RH and LH sides.

  3. INSTALL VISOR ASSEMBLY LH


    1. A01BB5I

      Install the visor assembly with the 2 screws.

  4. INSTALL VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedures described for LH side.

  5. INSTALL ASSIST GRIP


    1. A01BDOY

      Install the assist grip with the 2 screws.

    2. A01BC8I

      Engage the 2 assist grip plugs.

  6. INSTALL NO. 2 ROOF HEADLINING


    1. A01BBBX

      Install the No. 2 roof headlining with the 3 clips.

  7. INSTALL NO. 3 ROOF HEADLINING


    1. A01BBFK

      Install the No. 3 roof headlining with the 3 clips.

  8. INSTALL NO. 4 ROOF HEADLINING


    1. A01BAB6

      Install the No. 4 roof headlining with the 17 clips.

  9. INSTALL ROOF CLIP


    1. A01BAXJ

      Engage the 2 claws and install the roof clip.

  10. INSTALL ROOF HEADLINING MOULDING


    1. A01BALX

      Install the 4 roof headlining mouldings with the 22 clips.

  11. INSTALL NO. 2 ROOM LIGHT ASSEMBLY


    1. A01BG0A

      Connect the connector and install the No. 2 room light assembly.

    2. Tighten the 2 screws.

    3. A01BGPE

      Engage the 4 claws and install the No. 2 room light assembly.

  12. INSTALL NO. 1 ROOM LIGHT ASSEMBLY


    1. A01BG0A

      Connect the connector and install the No. 1 room light assembly.

    2. Tighten the 2 screws.

    3. A01BGPE

      Engage the 4 claws and install the No. 1 room light assembly.

  13. INSTALL ROOF HEADLINING GARNISH


    1. A01BBN3

      Engage the 16 clips and install the roof headlining garnish.

  14. INSTALL FRONT PILLAR GARNISH RH


    1. A01BHWK

      Engage the clip and 2 claws and install the front pillar garnish RH.

  15. INSTALL FRONT PILLAR GARNISH LH

    Tech Tips

    Use the same procedures described for RH side.

  16. INSTALL ASSIST GRIP ASSEMBLY


    1. A01BAU2

      Install the assist grip with the 2 screws.

  17. INSTALL ASSIST GRIP PLUG


    1. A01BCSQ

      Engage the 2 assist grip plugs.

  18. INSTALL FRONT DOOR OPENING TRIM RH

  19. INSTALL FRONT DOOR OPENING TRIM LH

  20. INSTALL FRONT DOOR SCUFF PLATE LH


    1. A01BGMI

      Engage the 5 clips and install the front door scuff plate LH.

  21. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedures described for LH side.

  22. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.