BACK DOOR INSPECTION


  1. INSPECT LICENSE PLATE LIGHT ASSEMBLY


    1. A01BHDKE01
      Text in Illustration
      *a

      Component without harness connected

      (License Plate Light Assembly)

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Switch ON Below 1 Ω
        1 - 2 Switch OFF 10 kΩ or higher

        If the result is not as specified, replace the license plate light assembly.