BACK DOOR DISASSEMBLY


  1. REMOVE OUTER UNDER REAR VIEW MIRROR ASSEMBLY (w/ Outer Under Rear View Mirror)


    1. A01BB7CE01

      Remove the 3 screws, disengage the pin and remove the outer under rear view mirror.

      Tech Tips

      The screw <a> cannot be removed because it is integrated with the outer under view mirror.

  2. REMOVE BACK DOOR SERVICE HOLE COVER (for Wide Body)

  3. REMOVE UPPER BACK DOOR TRIM BOARD ASSEMBLY (w/o Rear Wiper)


    1. A01BHJWE01

      Detach the 5 clips and remove the upper back door trim board assembly.

  4. REMOVE UPPER BACK DOOR TRIM BOARD ASSEMBLY (w/ Rear Wiper)


    1. A01BC10E01

      Detach the 6 clips and remove the upper back door trim board assembly.

    2. Remove the remaining clips on the body, and reinstall them to the upper back door trim board assembly.

  5. REMOVE UPPER BACK DOOR TRIM BOARD ASSEMBLY (for Wide Body)

    A01BEWKE01

    1. Detach the 18 clips and remove the upper back door trim board assembly.

    2. Remove the remaining clips on the body, and reinstall them to the upper back door trim board assembly.

  6. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)


    1. A01BGS2E01

      Disengage the 3 claws and separate the head cap as shown in the illustration.

    2. Remove the rear wiper arm nut and rear wiper arm and blade assembly.

  7. REMOVE REAR WIPER SHAFT COVER (w/ Rear Wiper)


    1. A01BAL3

      Remove the rear wiper shaft cover.

  8. REMOVE NO. 1 REAR WIPER LINK PIVOT WASHER (w/ Rear Wiper)


    1. A01BCFP

      Using the socket wrench (27 mm), remove the lock nut and rear No.1 wiper link pivot washer.

      Note

      Do not damage the glass.

  9. REMOVE REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)


    1. A01BBR7E01

      Disconnect the connector and remove the clamp.

    2. Remove the 3 bolts and rear wiper motor and grommet as a unit.

    3. A01BGZ1E01

      Remove the grommet from the rear wiper motor.

  10. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY (w/ High Mounted Stop Light)


    1. A01BC7KE01

      Disconnect the connector.

    2. Using a screwdriver, detach the 8 claws and remove the high mounted stop light assembly.

      Text in Illustration
      *1 Protective Tape

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01BDH0

      Remove the gasket from the high mounted stop light assembly.

      Note

      When removing the high mounted stop light assembly, replace the gasket with a new one.

  11. REMOVE NO. 3 BACK DOOR WIRE


    1. Disconnect the connectors.

    2. A01BFMR

      Detach the 3 clamps and remove the No. 3 back door wire.

  12. REMOVE NO. 1 REAR WINDOW WIRE


    1. A01BBK3

      Detach the 2 clamps and remove the No. 1 rear window wire.

  13. REMOVE BACK DOOR INSIDE HANDLE COVER (w/ Cover)

    A01BD0M

    1. Detach the 4 claws and remove the back door inside handle cover.

  14. REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY (w/ Back Door Inside Handle)


    1. A01BDEV

      Remove the screw and the back door inside handle assembly.

  15. REMOVE BACK DOOR INSIDE HANDLE BEZEL (w/ Back Door Inside Handle Bezel)


    1. A01BHK4

      Remove the 2 screws and the back door inside handle bezel.

  16. REMOVE BACK DOOR PULL STRAP (w/ Strap)


    1. A01BAZ0

      Remove the screw and back door pull strap.

  17. REMOVE BACK DOOR TRIM BOARD (for Board)


    1. A01BA72

      Using a clip remover, remove the 16 clips and the back door trim board.

  18. REMOVE BACK DOOR TRIM BOARD (for Molded Door Trim)


    1. A01BHQI

      Remove the 2 screws

    2. Using a clip remover, remove the 18 clips and the back door trim board.

  19. REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY (w/ Back Door Inside Handle)


    1. Disconnect the link.

    2. Remove the 3 screws and the back door inside handle assembly.

      A01BDAZE02
      Text in Illustration
      *A w/o Power Door Lock *B w/ Power Door Lock

  20. REMOVE BACK DOOR REMOTE CONTROL ASSEMBLY (w/o Power Door Lock)


    1. Disconnect the wire and link.

    2. Detach the clamp.

    3. Remove the 2 screws and the back door remote control assembly.

      A01BCA5

  21. REMOVE BACK DOOR REMOTE CONTROL ASSEMBLY (w/ Power Door Lock)


    1. Disconnect the wire and link.

    2. Detach the 2 clamps.

    3. Remove the 3 screws and the back door remote control assembly.

      A01BG1V

  22. REMOVE BACK DOOR LOCK CYLINDER ASSEMBLY


    1. A01BAQ5

      Remove the 2 nuts and back door lock cylinder assembly.

  23. REMOVE BACK DOOR OUTSIDE HANDLE


    1. A01BCMI

      Remove the 2 nuts and the back door outside handle.

  24. REMOVE BACK DOOR OUTSIDE GARNISH


    1. w/ Smart Entry and Start System:


      1. Disconnect the 2 connectors.

    2. w/o Smart Entry and Start System:


      1. Disconnect the connector.

    3. A01BFFK

      Remove the 5 nuts.

    4. Detach the 2 clips and remove the back door outside garnish.

    5. A01BEPH

      Remove the grommet.

  25. REMOVE LICENSE PLATE LIGHT ASSEMBLY (w/ Smart Entry and Start System)


    1. A01BF7O

      Remove the 2 screws.

    2. A01BEEUE01

      Remove the 2 screws and detach the 2 wire harness clamps.

    3. Remove the 2 license plate lights assembly (smart switch) from the back door outside garnish in the order shown in the illustration.

  26. REMOVE DOOR ELECTRICAL KEY SWITCH COVER (w/ Smart Entry and Start System)


    1. Remove the door electrical key switch cover.

  27. REMOVE LICENSE PLATE LIGHT ASSEMBLY (w/o Smart Entry and Start System)


    1. A01BEEUE01

      Remove the 2 screws and detach the 2 wire harness clamps.

    2. Remove the 2 license plate lights from the back door outside garnish in the order shown in the illustration.

  28. REMOVE TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)


    1. A01BHHF

      Disconnect the connector.

    2. A01BAEX

      Remove the screw.

    3. Detach the 2 claws and television camera assembly.

  29. REMOVE BACK DOOR CLOSER RELAY (w/ Easy Closer)


    1. A01BCYE

      Disconnect the connector.

    2. Remove the 2 bolts and back door closer relay.

  30. REMOVE BACK DOOR CLOSER COVER (w/ Easy Closer)


    1. A01BGYO

      Detach the 3 clips and 3 claws and remove the back closer cover.

  31. REMOVE BACK DOOR STOPPER BRACKET SUB-ASSEMBLY (for Rough Road Area Spec)


    1. A01BF5G

      Remove the 2 bolts and the back door stopper bracket sub-assembly.

  32. REMOVE BACK DOOR LOCK PROTECTOR (w/ Rear Bumper Step)


    1. A01BFOU

      Remove the screw and the back door lock protector.

  33. REMOVE PIN HOLD CLIP (w/ Easy Closer)


    1. A01BC4I

      Remove the pin hold clip.

  34. REMOVE BACK DOOR LOCK ASSEMBLY (w/ Easy Closer)


    1. A01BB49

      Remove the 4 bolts and the back door lock assembly.

  35. REMOVE BACK DOOR CLOSER MOTOR ASSEMBLY (w/ Easy Closer)


    1. A01BEBI

      Disconnect the connector and detach the clamp.

    2. Remove the 3 bolts and back door closer motor assembly.

  36. REMOVE DOOR CONTROL MOTOR (w/ Easy Closer)


    1. A01BBXY

      Using a T25 "TORX" driver, remove the 3 "TORX" screws and door control motor.

  37. REMOVE BACK DOOR LOCK ASSEMBLY (w/o Easy Closer)


    1. A01BC6TE03
      Text in Illustration
      *A w/o Rear Bumper Step
      *B w/ Rear Bumper Step

      Remove the 3 bolts and the back door lock assembly.

  38. REMOVE NO. 2 BACK DOOR WIRE


    1. A01BFXU

      Remove the bolt.

    2. Detach the 6 clamps and remove the No. 2 back door wire.

  39. REMOVE BACK DOOR STOPPER LH


    1. A01BCLUE04
      Text in Illustration
      *A for Standard Area Spec
      *B for Rough Road Area Spec

      Remove the 2 bolts and the back door stopper LH.

  40. REMOVE BACK DOOR STOPPER RH

    Tech Tips

    Use the same procedure for the LH side.

  41. REMOVE BACK DOOR STAY ASSEMBLY LH


    1. A01BBCT

      Remove the 4 bolts and the back door stay assembly LH.

      Note

      Remove the back door stay while holding the back door to prevent it from moving down.

  42. REMOVE BACK DOOR STAY ASSEMBLY RH

    Tech Tips

    Use the same procedure for the LH side.