BACK DOOR DISASSEMBLY


  1. REMOVE OUTER UNDER REAR VIEW MIRROR ASSEMBLY (w/ Outer Under Rear View Mirror)


    1. A01BB7CE01

      Remove the 3 screws, disengage the pin and remove the outer under rear view mirror.

      Tech Tips

      The screw <a> cannot be removed because it is integrated with the outer under view mirror.

  2. REMOVE BACK DOOR SERVICE HOLE COVER

  3. REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER (w/o Rear Wiper)


    1. A01BHJWE01

      Disengage the 5 clips and remove the back door trim board assembly upper.

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER (w/ Rear Wiper)


    1. A01BC10E01

      Disengage the 6 clips and remove the back door trim board assembly upper.

    2. Remove the remaining clips on the body, and reinstall them to the back door trim board assembly upper.

  5. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)


    1. A01BGS2E01

      Disengage the 3 claws and separate the head cap as shown in the illustration.

    2. Remove the rear wiper arm nut and rear wiper arm and blade assembly.

  6. REMOVE REAR WIPER SHAFT COVER (w/ Rear Wiper)


    1. A01BAL3

      Remove the rear wiper shaft cover.

  7. REMOVE REAR WIPER LINK PIVOT NO.1 WASHER (w/ Rear Wiper)


    1. A01BCFP

      Using the socket wrench (27 mm), remove the lock nut and rear No.1 wiper link pivot washer.

      Note

      Do not damage the glass.

  8. REMOVE REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)


    1. A01BBR7E01

      Disconnect the connector and remove the clamp.

    2. Remove the 3 bolts and rear wiper motor and grommet as a unit.

    3. A01BGZ1E01

      Remove the grommet from the rear wiper motor.

  9. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY (w/ High Mounted Stop Light)


    1. Disconnect the connector.

    2. A01BFUCE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the high mounted stop light assembly.

  10. REMOVE BACK DOOR NO.3 WIRE


    1. Disconnect the connectors.

    2. A01BDL0E01

      Disengage the 2 clamps and remove the back door No.3 wire.

  11. REMOVE REAR WINDOW NO.1 WIRE


    1. A01BBGTE01

      Disengage the 2 clamps and remove the rear window No.1 wire.

  12. REMOVE BACK DOOR INSIDE HANDLE (w/ Back Door Inside Handle)


    1. A01BDEV

      Remove the screw and the back door inside handle.

  13. REMOVE BACK DOOR INSIDE HANDLE BEZEL (w/ Back Door Inside Handle Bezel)


    1. A01BHK4

      Remove the 2 screws and the back door inside handle bezel.

  14. REMOVE BACK DOOR TRIM BOARD (DX Grade)


    1. A01BA72

      Using a clip remover, remove the 16 clips and the back door trim board.

  15. REMOVE BACK DOOR TRIM BOARD (GL Grade)


    1. A01BD78E01

      Using a clip remover, remove the 18 clips and the back door trim board.

  16. REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY (w/ Back Door Inside Handle)


    1. Disconnect the link.

      A01BDAZE01

    2. Remove the 3 screws and the back door inside handle assembly.

  17. REMOVE BACK DOOR REMOTE CONTROL ASSEMBLY (w/o Power Door Lock)


    1. A01BEMVE01

      Disconnect the wire and link.

    2. Disengage the clamp.

    3. Remove the screw and the back door remote control assembly.

  18. REMOVE BACK DOOR REMOTE CONTROL ASSEMBLY (w/ Power Door Lock)


    1. A01BC4UE01

      Disconnect the wire and link.

    2. Disengage the 2 clamps.

    3. Remove the 3 screws and the back door remote control assembly.

  19. REMOVE BACK DOOR OUTSIDE HANDLE


    1. A01BCMI

      Remove the 2 nuts and the back door outside handle.

  20. REMOVE BACK DOOR GARNISH OUTSIDE

  21. REMOVE BACK DOOR NO.2 WIRE


    1. A01BI1YE01

      Remove the bolt.

    2. Disengage the 6 clamps and remove the back door No.2 wire.

  22. REMOVE BACK DOOR NO.1 WIRE

  23. REMOVE BACK DOOR STOPPER BRACKET SUB-ASSEMBLY (for Rough Road Area Spec.)


    1. A01BF5G

      Remove the 2 bolts and the back door stopper bracket sub-assembly.

  24. REMOVE BACK DOOR LOCK PROTECTOR (w/ Rear Bumper Step)


    1. A01BFOU

      Remove the screw and the back door lock protector.

  25. REMOVE BACK DOOR LOCK ASSEMBLY


    1. A01BC6TE01

      Remove the 3 bolts and the back door lock assembly.

  26. REMOVE BACK DOOR STOPPER LH


    1. A01BCLUE03

      Remove the 2 bolts and the back door stopper LH.

  27. REMOVE BACK DOOR STOPPER RH

  28. REMOVE BACK DOOR STAY ASSEMBLY LH


    1. A01BBCT

      Remove the 4 bolts and the back door stay assembly LH.

      Note

      Remove the back door stay while holding the back door to prevent it from moving down.

  29. REMOVE BACK DOOR STAY ASSEMBLY RH