SLIDE DOOR CLOSER RELAY (w/o Power Slide Door) REMOVAL


  1. REMOVE SLIDE DOOR WINDOW GARNISH


    1. A01BBXLE01

      Disengage the 4 clips and remove the slide door window garnish.

  2. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. A01BEUR

      Using a "torx" socket wrench (T25), remove the 2 "torx" screws.

    2. A01BHO8E01

      Disengage the 19 clips and claw, and remove the rear door trim board sub-assembly.

  3. REMOVE SLIDE DOOR SERVICE HOLE NO.1 COVER


    1. A01BFP4E01

      Disengage the clamp.

    2. Disconnect the cable from the slide door lock remote control assembly.

    3. Remove the slide door service hole No.1 cover.

  4. REMOVE SLIDE DOOR CLOSER RELAY


    1. A01BC3C

      Disconnect the connector.

    2. Remove the bolt and the slide door closer relay.