POWER SLIDE DOOR MOTOR ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE REAR DOOR SCUFF PLATE LH


    1. A01BDOD

      Disengage the claw and 12 clips.

    2. Disconnect the connector and remove the rear door scuff plate.

  3. REMOVE SIDE STEP REAR SUPPORT LH

    A01BCL4

    1. Remove the 3 bolts and the side step rear support.

  4. REMOVE DOOR CONTROL RELAY ASSEMBLY

    A01BAHA

    1. Disconnect the connectors.

    2. Remove the bolt and the door control relay.

  5. SEPARATE REAR NO. 2 DOOR WIRE


    1. A01BFD5

      Remove the bolt.

    2. A01BA6N

      Disconnect the connector from the vehicle.

  6. REMOVE POWER SLIDE DOOR MOTOR ASSEMBLY


    1. A01BABJ

      Remove the 2 bolts.

    2. A01BBPH

      Remove the bolt and the slide door lower rail plate.

    3. Remove the slide door lower roller assembly LH from the belt bracket of the power slide door motor assembly.

    4. A01BE2S

      Remove the 2 grommets.

    5. A01BGBP

      Remove the 10 bolts and the power slide door motor.