POWER SLIDE DOOR MAIN SWITCH INSPECTION


  1. INSPECT POWER SLIDE DOOR MAIN SWITCH


    1. A01BCIFE03
      Text in Illustration
      *a

      Component without harness connected

      (Power Slide Door Main Switch)
      *b Switch ON
      *c Switch OFF

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        9 - 6 Switch ON Below 1 Ω
        9 - 6 Switch OFF 10 kΩ or higher

        If the result is not as specified, replace the power slide door main switch.

    2. Check the illumination operation.


      1. Apply battery voltage to the power slide door main switch and check that the illumination comes on.

        Standard
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 8

        Battery negative (-) → Terminal 7

        		 LED illuminates

        If the result is not as specified, replace the power slide door main switch.