SLIDE DOOR (w/o Power Slide Door) DISASSEMBLY


  1. REMOVE DOOR LOCK CONTROL KNOB BEZEL (w/o Auto Closer)


    1. A01BE6OE01

      Using a "torx" socket wrench (T25), remove the 2 "torx" screws.

    2. Disengage the 2 claws and remove the door control knob bezel.

  2. REMOVE SLIDE DOOR WINDOW GARNISH (w/ Auto Closer)


    1. A01BGH7E01

      Disengage the 4 clips and remove the slide door window garnish.

  3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY (w/o Auto Closer)


    1. A01BBLK

      Using a clip remover, remove the 20 clips and the rear door trim board sub-assembly.

  4. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY (w/ Auto Closer)


    1. A01BEUR

      Using a "torx" socket wrench (T25), remove the 2 "torx" screws.

    2. A01BHJDE01

      Disengage the 19 clips and claw and remove the rear door trim board sub-assembly.

  5. REMOVE SLIDE DOOR SERVICE HOLE NO.1 COVER


    1. A01BAJ7E01

      Disengage the clamp.

    2. Disconnect the cable from the slide door lock remote control assembly.

    3. Remove the slide door service hole No.1 cover.

  6. REMOVE REAR DOOR INSIDE HANDLE SUB-ASSEMBLY


    1. A01BBGM

      Disconnect the 2 links.

    2. Remove the 2 bolts and the rear door inside handle sub-assembly.

  7. REMOVE REAR DOOR OUTSIDE HANDLE ASSEMBLY


    1. A01BAEN

      Disconnect the link.

    2. Remove the bolt and the slide door lock cylinder assembly.

    3. A01BF9W

      Disconnect the link.

    4. Remove the bolt and the rear door outside handle assembly.

  8. REMOVE REAR DOOR LOCK CHILD PROTECTION COVER (w/ Cover)


    1. for Clip Type:


      1. A01BBL6

        Remove the clip and the rear door lock child protection cover.

    2. for Tape Type:


      1. A01BA6E

        Remove the rear door lock child protection cover.

  9. REMOVE REAR DOOR OPEN CONTROL LINK ASSEMBLY (w/o Cover)


    1. A01BFG3

      Disconnect the link.

    2. Remove the clip and the rear door open control link assembly.

  10. REMOVE SLIDE DOOR LOCK ASSEMBLY FRONT


    1. A01BDW7E01

      Disconnect the cable.

    2. Using a "torx" socket wrench (T30), remove the 3 "torx" screws and the slide door lock assembly front.

  11. REMOVE SLIDE DOOR CONTROL JUNCTION FEMALE


    1. Disconnect the connector.

    2. A01BBZFE01

      Remove the 2 bolts and the slide door control junction female.

  12. REMOVE SLIDE DOOR DOWN FEMALE STOP


    1. A01BBTY

      Remove the 2 bolts and the slide door down female stop.

  13. REMOVE SLIDE DOOR FULL OPEN STOP LOCK ASSEMBLY


    1. Disengage the clamp.

    2. A01BCL3E01

      Remove the 2 bolts and the slide door full open stop lock assembly.

  14. REMOVE SLIDE DOOR CLOSER RELAY (w/ Auto Closer)


    1. Disconnect the connector.

    2. A01BCXQ

      Remove the bolt and the slide door closer relay.

  15. REMOVE REAR DOOR LOCK ASSEMBLY (w/ Auto Closer)


    1. A01BDYRE01

      Disconnect the cable.

    2. Disengage the clamp.

    3. Using a "torx" socket wrench (T30), remove the 3 "torx" screws and the rear door lock assembly.

  16. REMOVE POWER SLIDE DOOR LOCK ASSEMBLY (w/ Auto Closer)


    1. A01BFU2E01

      Disconnect the cable.

    2. Disengage the clamps and remove the bolt.

    3. Using a "torx" socket wrench (T30), remove the 3 "torx" screws and the power slide door lock assembly.

  17. REMOVE SLIDE DOOR LOCK REMOTE CONTROL ASSEMBLY


    1. Disconnect the connector.

    2. A01BHRM

      Remove the 5 bolts and the slide door lock remote control assembly.

  18. REMOVE REAR DOOR SCUFF PLATE


    1. A01BE0J

      Disengage the 11 clips and remove the rear door scuff plate.

  19. REMOVE SLIDE RAIL END MOULDING


    1. Pull on the end moulding while sliding it toward the rear of the vehicle. Disengage the clip to remove the slide rail end moulding.

      A01BD1EE01

  20. REMOVE SLIDE DOOR UPPER RAIL CUSHION


    1. A01BFX6

      Remove the bolt and the slide door upper rail cushion.

  21. REMOVE SLIDE DOOR LOWER RAIL PLATE


    1. A01BAMO

      Remove the bolt and the slide door lower rail plate.

  22. REMOVE SLIDE DOOR SUB-ASSEMBLY


    1. Remove the slide door roller assembly lower base from the notch on the slide door rail lower.

    2. Remove the slide door roller assembly upper base from the notch on the slide door rail upper.

    3. Slide the door toward the rear of the vehicle, remove the slide door hinge center base from the slide door rail center, and remove the slide door.

  23. REMOVE SLIDE DOOR ROLLER ASSEMBLY UPPER


    1. Remove the 2 bolts and the slide door roller assembly upper.

  24. REMOVE SLIDE DOOR HINGE ASSEMBLY CENTER


    1. Remove the 2 bolts and the slide door hinge assembly center.

  25. REMOVE SLIDE DOOR ROLLER ASSEMBLY LOWER


    1. Remove the 4 bolts and the slide door roller assembly lower.