POWER SLIDE DOOR SYSTEM OPERATION CHECK


  1. CHECK OPENING OPERATION


    1. Conditions necessary for the power slide door to open:


      1. Auto slide door main switch is in the ON position.

      2. Slide door is positioned between the fully closed position and the half-open position (When the slide door is fully closed, the door must be unlocked).

      3. Shift lever is in the P position when the ignition switch is ON.

    2. Press the auto slide door control switch for the power slide door.


      1. Check that the power slide door opens when the switch has been pressed for more than 0.5 seconds.

        Tech Tips

        The power slide door can operate even when the child lock is ON.

      2. Check that the power slide door reverses operation and moves to the fully closed position when the same switch is pressed again during opening.

    3. Pull the outside / inside handle for the power slide door.


      1. Check that the power slide door opens when the handle is pulled.

        Tech Tips


        • For the inside handle, the power slide door can operate only when the child lock is OFF.

        • For the outside handle, the power slide door can operate even when the child lock is ON.

      2. Check that the power slide door reverses operation and moves to the fully closed position when the same handle is pulled again during opening.

  2. CHECK CLOSING OPERATION


    1. Conditions necessary for the power slide door to close:


      1. Auto slide door main switch is in the ON position.

      2. Slide door is positioned between the fully open position and the half-open position.

    2. Press the auto slide door control switch for the power slide door.


      1. Check that the power slide door closes when the switch has been pressed for more than 0.5 seconds.

        Tech Tips

        The power slide door can operate even when the child lock is ON.

    3. Check that the power slide door reverses operation and moves to the fully open position when the same switch is pressed again during closing.

    4. Pull the outside / inside handle for the power slide door.


      1. Check that the power slide door closes when the handle is pulled.

      2. Check that the power slide door reverses operation and moves to the fully open position when the same handle is pulled again during closing.

  3. CHECK JAM PROTECTION FUNCTION

    CAUTION:

    Do not use any part of the body to check this function. Make sure that nothing becomes accidentally caught in the power slide door during operation.

    Tech Tips


    • The power slide door motor and power slide door clutch detect changes in the operating speed of the slide door while the power slide door is moving. If a change in the operating speed is out of the normal range, it will be judged to be a jam or a foreign object detected in the direction that the power slide door is moving.

    • When the power slide door sensor built into the front end of the slide door is compressed, it is judged to be a jam or a foreign object detected in the direction that the power slide door is moving, and the power slide door movement will reverse.

    • The power slide door sensor operates only while the slide door is closing. It does not operate while the slide door is opening.


    1. Check the jam protection function while the power slide door is closing.


      1. Fully open the slide door.

      2. Press the switch that operates the power slide door to close it.

      3. While the slide door is closing, hold the slide door by hand to decrease the door closing speed.

      4. Check that the buzzer sounds 2 times for 0.13 seconds and the slide door reverses operation to the fully open position.

        Tech Tips

        Perform this check when the slide door closes 30 cm or more from the fully open position.

    2. Check the jam protection function while the power slide door is opening.


      1. Fully close the slide door.

      2. Press the switch that operates the power slide door to open it.

      3. When the slide door reaches the position where the distance to the fully open position is 20 cm or less, hold the slide door by hand to decrease the door opening speed

      4. Check that the slide door stops moving.

      5. Repeat steps (1) and (2).

      6. Before the slide door reaches the position where the distance to the fully open position is approximately 20 cm, hold the slide door by hand to decrease the door opening speed.

      7. Check that the slide door reverses operation to the fully closed position.

    3. Check the operation of the power slide door when the jam protection function is consecutively activated.

      Check that the power slide door operation is cancelled and switched to the manual operation mode (not electrically controlled) when the jam protection function has been activated 2 or more consecutive times and when the 2nd or most recent activation has occurred during closing.

      Tech Tips

      Refer to the previous 2 steps for methods to activate the jam protection function.

      Note

      To restore the power slide door system to the normal operation mode, perform one of the following:


      • Manually close the slide door fully.

      • Press the auto slide door control switch again.