HEADLIGHT DIMMER SWITCH INSPECTION


  1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for LHD)

    A01BA7FE05
    Text in Illustration
    *a

    Component without harness connected

    (Headlight Dimmer Switch Assembly)

    1. Inspect the light control switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        18 (T) - 15 (EL) Light control switch off 10 kΩ or higher
        20 (A) - 15 (EL)
        19 (H) - 15 (EL)
        18 (T) - 15 (EL) Light control switch tail Below 1 Ω
        18 (T) - 15 (EL) Light control switch head Below 1 Ω
        19 (H) - 15 (EL)
        20 (A) - 15 (EL) Light control switch auto Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    2. A01BA7FE06
      Text in Illustration
      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Inspect the headlight dimmer switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        17 (HF) - 15 (EL) Headlight dimmer switch flash Below 1 Ω
        14 (HU) - 15 (EL)
        16 (HL) - 15 (EL) Headlight dimmer switch low beam Below 1 Ω
        14 (HU) - 15 (EL) Headlight dimmer switch hi beam Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    3. A01BA7FE07
      Text in Illustration
      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Inspect the turn signal switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        12 (TR) - 15 (EL) Turn signal switch neutral 10 kΩ or higher
        11 (TL) - 15 (EL)
        12 (TR) - 15 (EL) Turn signal switch right turn Below 1 Ω
        11 (TL) - 15 (EL) Turn signal switch left turn Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    4. A01BA7FE08
      Text in Illustration
      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Inspect the fog light switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        9 (BFG) - 8 (LFG) Front fog light switch off 10 kΩ or higher
        9 (BFG) - 8 (LFG) Front fog light switch on Below 1 Ω
        9 (BFG) - 8 (LFG) Rear fog light switch off 10 kΩ or higher
        7 (B) - 8 (LFG)
        9 (BFG) - 8 (LFG) Rear fog light switch on Below 1 Ω
        7 (B) - 8 (LFG)

        If the result is not as specified, replace the headlight dimmer switch assembly.

  2. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for RHD)

    A01BA7FE01
    Text in Illustration
    *a

    Component without harness connected

    (Headlight Dimmer Switch Assembly)

    1. Inspect the light control switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        13 (T) - 16 (EL) Light control switch off 10 kΩ or higher
        11 (A) - 16 (EL)
        12 (H) - 16 (EL)
        13 (T) - 16 (EL) Light control switch tail Below 1 Ω
        13 (T) - 16 (EL) Light control switch head Below 1 Ω
        12 (H) - 16 (EL)
        11 (A) - 16 (EL) Light control switch auto Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    2. A01BA7FE02
      Text in Illustration
      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Inspect the headlight dimmer switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        14 (HF) - 16 (EL) Headlight dimmer switch flash Below 1 Ω
        17 (HU) - 16 (EL)
        15 (HL) - 16 (EL) Headlight dimmer switch low beam Below 1 Ω
        17 (HU) - 16 (EL) Headlight dimmer switch hi beam Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    3. A01BA7FE03
      Text in Illustration
      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Inspect the turn signal switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        20 (TR) - 16 (EL) Turn signal switch neutral 10 kΩ or higher
        19 (TL) - 16 (EL)
        20 (TR) - 16 (EL) Turn signal switch right turn Below 1 Ω
        19 (TL) - 16 (EL) Turn signal switch left turn Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    4. A01BA7FE04
      Text in Illustration
      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Inspect the fog light switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        2 (BFG) - 3 (LFG) Front fog light switch off 10 kΩ or higher
        2 (BFG) - 3 (LFG) Front fog light switch on Below 1 Ω
        2 (BFG) - 3 (LFG) Rear fog light switch off 10 kΩ or higher
        4 (B) - 3 (LFG)
        2 (BFG) - 3 (LFG) Rear fog light switch on Below 1 Ω
        4 (B) - 3 (LFG)

        If the result is not as specified, replace the headlight dimmer switch assembly.