HIGH MOUNTED STOP LIGHT ASSEMBLY REMOVAL


  1. REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER (w/o Rear Wiper)


    1. A01BHJWE01

      Disengage the 5 clips and remove the back door trim board assembly upper.

  2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER (w/ Rear Wiper)


    1. A01BC10E01

      Disengage the 6 clips and remove the back door trim board assembly upper.

    2. Remove the remaining clips on the body, and reinstall them to the back door trim board assembly upper.

  3. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY


    1. A01BC7KE01

      Disconnect the connector.

    2. Using a screwdriver, detach the 8 claws and remove the high mounted stop light assembly.

      Text in Illustration
      *1 Protective Tape

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01BDH0

      Remove the gasket from the high mounted stop light assembly.

      Note

      When removing the high mounted stop light assembly, replace the gasket with a new one.