HIGH MOUNTED STOP LIGHT ASSEMBLY REMOVAL


  1. REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER


    1. A01BC10E01

      Disengage the 6 clips and remove the back door trim board assembly upper.

    2. Remove the remaining clips on the body, and reinstall them to the back door trim board assembly upper.

  2. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY


    1. Disconnect the connector.

    2. A01BFUCE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the high mounted stop light assembly.