REAR COMBINATION LIGHT ASSEMBLY (w/ Aero Stabilizing Fin) INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

    A01BDFSE01
    Text in Illustration
    *1 Protective Tape
    *2 Pin

    1. Put protective tape around the rear combination light assembly LH.

    2. Connect the connector.

    3. Move the rear combination light assembly LH in the direction of the arrow in the illustration and attach the 2 pins to install the rear combination light assembly LH.

    4. Install the 2 screws.