FOG LIGHT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FOG LIGHT ASSEMBLY LH


    1. Install the fog light assembly LH to the fog light bracket LH.

  2. INSTALL FOG LIGHT BRACKET LH


    1. Install the fog light bracket LH to the front bumper cover with the screw.

    2. Install the clip.

    3. Attach the 2 wire harness clamps.

    4. Connect the connector.

  3. INSTALL FOG LIGHT COVER LH


    1. Attach the 3 claws to install the fog light cover LH.

  4. INSTALL FRONT BUMPER COVER (for Standard Body)

    Click here

  5. INSTALL FRONT BUMPER COVER (for Wide Body)

    Click here

  6. FOG LIGHT AIMING ADJUSTMENT

    Click here

  7. INSPECT FOG LIGHT ASSEMBLY


    1. Turn the ignition switch to on.

    2. Turn the headlight dimmer switch to the tail or head position.

    3. Turn the fog light switch on and check that the fog light illuminates.