STOP LIGHT SWITCH INSPECTION


  1. INSPECT STOP LIGHT SWITCH


    1. A01BDVNE01

      Remove the stop light switch.

    2. Measure the resistance according to the value(s) in the table below.

      Resistance
      Tester connection Switch operation Specified condition
      1 - 2 Switch pin free Below 1 Ω
      3 - 4 Switch pin free 10 kΩ or higher
      1 - 2 Switch pin pushed in 10 kΩ or higher
      3 - 4 Switch pin pushed in Below 1 Ω

      If the result is not as specified, replace the stop light switch.