HEADLIGHT LEVELING SWITCH INSPECTION


  1. INSPECT HEADLIGHT LEVELING SWITCH


    1. A01BD6SE01

      Inspect headlight leveling switch operation.


      1. Remove the headlight leveling switch.

      2. Apply battery voltage to the headlight leveling switch connector.

      3. Measure the voltage according to the value(s) in the table below.

        Voltage
        Measurement condition Switch condition Tester connection

        Specified condition

        (Battery voltage is 12 V)

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 0

        4 - 1

        5 - 1

        		 10.44 V - 11.16 V

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 1

        4 - 1

        5 - 1

        		 8.52 V - 9.24 V

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 2

        4 - 1

        5 - 1

        		 6.60 V - 7.32 V

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 3

        4 - 1

        5 - 1

        		 4.68 V - 5.4 V

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 4

        4 - 1

        5 - 1

        		 2.76 V - 3.48 V

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 5

        4 - 1

        5 - 1

        		 0.84 V - 1.56 V

        If the result is not as specified, replace the headlight leveling switch.

    2. Inspect illumination operation.


      1. Apply battery voltage to the headlight leveling switch connector.

      2. Check that the illumination comes on.

        OK
        Measurement condition Specified condition

        Battery positive (+) → Terminal 3

        Battery positive (-) → Terminal 6

        		 Illumination comes on

        If the result is not as specified, replace the headlight leveling switch.