LIGHTING SYSTEM OPERATION CHECK


  1. AUTOMATIC LIGHT CONTROL OPERATION CHECK (w/ Automatic Light Control System)


    1. Turn the ignition switch to ON.

    2. Turn the headlight dimmer switch to the AUTO position.

    3. Cover the automatic light control sensor and check that the taillights and headlights come on in order.

    4. Uncover the automatic light control sensor and check that the headlights and taillights go off in order.

  2. LIGHT AUTO TURN OFF OPERATION CHECK (w/ Automatic Light Control System)


    1. Turn the ignition switch to ON.

    2. Turn the headlight dimmer switch to the AUTO position and have headlights lighting.

    3. Turn the ignition switch off and open the driver's door.

    4. Check that the headlights go off immediately.

  3. INSPECT ILLUMINATED ENTRY SYSTEM OPERATION (w/ Illuminated Entry System)


    • *1: w/ Personal Light Assembly

    • *2: w/o Personal Light Assembly

    Tech Tips

    When inspecting the following functions, make sure that the personal light switch*1or front room light switch*2 is in the door position.


    1. The illuminated entry system illuminates the items below.


      • Ignition key cylinder light

      • Personal light assembly*1

      • Front room light assembly*2

    2. The operation and operating condition of this control are described below.

      Operation Condition
      Lights fade in and illuminate constantly Any door is opened when all the doors are closed.
      Lights illuminate for 15 seconds, and then fade out

      When any of the following conditions is met:


      • All the doors are unlocked using the transmitter, when the ignition switch is off and all the doors are closed and locked.

      • Driver side door is unlocked using the mechanical key, when the ignition switch is off and all the doors are closed and locked.

      • Driver side door is unlocked using the lock/unlock switch, when the ignition switch is off and all the doors are closed and locked.

      • The ignition switch is turned from ON to off when all doors are closed.

      • All the doors are closed when any door is opened and the ignition switch is off.
      Lights fade out immediately

      When either of the following conditions is met:


      • The ignition switch is turned from off to ON when all the doors are closed.

      • All the doors are locked using the transmitter, when the ignition switch is off, all the doors are closed and any door is unlocked.

      • Driver side door is locked using the mechanical key, when the ignition switch is off, all the doors are closed and any door is unlocked.

      • Driver side door is locked using the lock/unlock switch, when the ignition switch is off, all the doors are closed and any door is unlocked.
      Battery saving The doors remain in the same condition for 20 minutes.