FRONT SEAT OUTER BELT ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait for 90 seconds after disconnecting the cable to prevent the airbag working Click here.

  2. REMOVE FRONT DOOR SCUFF PLATE LH

    for Semi-trim Click here

    for Full-trim Click here

  3. REMOVE FRONT DOOR OPENING TRIM LH

    for Semi-trim Click here

    for Full-trim Click here

  4. REMOVE SEPARATOR BAR BRACKET LOWER (for Semi-trim LH Side)


    1. A01BEQ4

      Remove the screw and separator bar bracket lower.

  5. REMOVE CENTER PILLAR GARNISH COVER LOWER LH

    for Semi-trim Click here

    for Full-trim Click here

  6. REMOVE SEAT ASSEMBLY LH

    for Semi-trim Click here

    for Full-trim Click here

  7. REMOVE SEAT BELT ANCHOR COVER (for LH Side)


    1. A01BDQZ

      Disengage the claw and remove the 2 clips and seat belt anchor cover.

  8. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH


    1. A01BAV9

      Remove the bolt and disconnect the floor side of the front seat outer belt assembly LH.

  9. REMOVE CENTER PILLAR GARNISH LOWER LH (for Semi-trim)


    1. A01BHX3E01

      Using a screwdriver, disengage the 4 claws and remove the center pillar garnish cover lower LH.

      Tech Tips

      Tape the screwdriver tip before use.

  10. REMOVE REAR NO.2 SEAT ASSEMBLY (for Full-trim LH Side)


    1. A01BFKN

      Remove the 4 bolts, 2 nuts and rear No.2 seat assembly.

      Tech Tips


      • Use the same procedure for the second row.

      • Use the same procedure for the third row.

  11. REMOVE REAR NO.3 SEAT ASSEMBLY (for Full-trim LH Side)


    1. A01BCP7

      Remove the 6 bolts, 2 nuts and rear No.3 seat assembly.

  12. REMOVE REAR NO.4 SEAT ASSEMBLY (for Full-trim LH Side)


    1. A01BDT2

      Remove the 3 bolts and 2 nuts.

    2. Pull the lever in the direction indicated by the arrow in the illustration, release the 2 locks, and remove the rear No.4 seat assembly.

  13. REMOVE BACK DOOR SCUFF PLATE (for Full-trim LH Side)


    1. A01BBWNE01

      Using a screwdriver, disengage the 7 clips and 4 claws and remove the back door scuff plate.

      Tech Tips

      Tape the screwdriver tip before use.

  14. REMOVE BACK DOOR WEATHERSTRIP (for Full-trim LH Side)

  15. REMOVE QUARTER TRIM PANEL ASSEMBLY REAR LH (for Full-trim)

    for Middle roof type Click here

    for High roof type Click here

  16. REMOVE SIDE NO.1 TRIM ASSEMBLY LH (for Full-trim)


    1. A01BFUT

      Using a screwdriver, disengage the 21 clips and remove the side No.1 trim assembly LH.

      Tech Tips

      Tape the screwdriver tip before use.

  17. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH


    1. A01BEJT

      Using a screwdriver, disengage the 2 claws and disconnect the shoulder side cover of the front seat outer belt assembly LH.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01BF4Z

      Remove the bolt and disconnect the shoulder side of the front seat outer belt assembly LH.

    3. A01BACT

      w/o Pretensioner:


      1. Remove the bolt and front seat outer belt assembly LH.

    4. A01BGSA

      w/ Pretensioner:


      1. Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner connector.

        Tech Tips

        Tape the screwdriver tip before use.

      2. A01BFOV

        Remove the 2 bolts and front seat outer belt assembly LH.

  18. REMOVE FRONT DOOR SCUFF PLATE RH

    for Semi-trim Click here

    for Full-trim Click here

  19. REMOVE FRONT DOOR OPENING TRIM RH

    for Semi-trim Click here

    for Full-trim Click here

  20. REMOVE REAR DOOR SCUFF PLATE RH (for Full-trim)


    1. A01BAVP

      Using a screwdriver, disengage the 11 clips and remove the rear door scuff plate LH.

      Tech Tips

      Tape the screwdriver tip before use.

  21. REMOVE SLIDE DOOR WEATHERSTRIP NO.1 RH

    for Semi-trim Click here

    for Full-trim Click here

  22. REMOVE SEPARATOR BAR BRACKET LOWER (for Semi-trim RH Side)


    1. A01BEQ4

      Remove the screw and separator bar bracket lower.

  23. REMOVE ASSIST GRIP PLUG (for Full-trim RH Side)


    1. A01BC0Y

      Using a screwdriver, disengage the assist grip plugs.

      Tech Tips

      Tape the screwdriver tip before use.

  24. REMOVE ASSIST GRIP ASSEMBLY REAR (for Full-trim RH Side)


    1. A01BD7L

      Remove the 2 screws and assist grip assembly rear.

  25. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH


    1. A01BF0I

      Remove the bolt and disconnect the floor side of the front seat outer belt assembly RH.

  26. REMOVE CENTER PILLAR GARNISH LOWER RH

    for Semi-trim Click here

    for Full-trim Click here

  27. REMOVE FRONT SEAT OUTER BELT ASSEMBLY RH


    1. A01BGOS

      Using a screwdriver, disengage the 2 claws and disconnect the shoulder side cover of the front seat outer belt assembly RH.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01BGXI

      Remove the bolt and disconnect the shoulder side of the front seat outer belt assembly RH.

    3. A01BFUB

      w/o Pretensioner:


      1. Remove the bolt and front seat outer belt assembly RH.

    4. A01BDTW

      w/ Pretensioner:


      1. Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner connector.

        Tech Tips

        Tape the screwdriver tip before use.

      2. A01BAA9

        Remove the 2 bolts and front seat outer belt assembly RH.