SEAT BELT WARNING SYSTEM PROBLEM SYMPTOMS TABLE
Tech Tips
Use the table below to help determine the causes of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom | Suspected Area | See page |
|---|---|---|
| Driver seat belt warning light does not blink, or it does not go off after the seat belt is fastened when the ignition switch is on. | Troubleshooting | |
| Combination meter assembly | ||
| Front seat inner belt (Driver side) | ||
| Wire harness | - | |
| Passenger seat belt warning light does not blink with the front passengers seat occupied, or it does not go off after the seat belt is fastened when the ignition switch is on. | Troubleshooting | |
| Occupant detection sensor | ||
| Combination meter assembly | ||
| Clearance warning indicator | ||
| Front seat inner belt (Front passenger side) | ||
| Wire harness | - | |
| Seat belt warning buzzer does not sound (Front driver and front passenger seat belt warning lights operate normally). | Combination meter assembly |