CENTER AIRBAG SENSOR ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM BATTERY NEGATIVE TERMINAL

    CAUTION:

    Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

  2. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1


    1. A01BE1S

      Using a moulding remover, disengage the 3 claws and remove the instrument cluster finish panel No.1 garnish.

  3. REMOVE AIR BAG SENSOR ASSEMBLY CENTER


    1. A01BI5L

      Disconnect the airbag connectors, as shown in the illustration.

    2. Remove the 3 bolts and center airbag sensor.