REMOVE FRONT DOOR SCUFF PLATE LH
Remove the 5 clips and front door scuff plate LH.
REMOVE FRONT DOOR OPENING TRIM LH
REMOVE SEAT BELT ANCHOR COVER
Remove the 2 clips.
Disengage the claw and then remove the seat belt anchor cover.
DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH
Remove the bolt and disconnect front seat outer belt assembly RH.
Using a screwdriver, disengage the 2 claws and cover.
Tech Tips
Tape the screwdriver tip before use.
Remove the bolt and disconnect front seat outer belt assembly RH.
REMOVE CENTER PILLAR GARNISH COVER LOWER LH
Using a screwdriver, disengage the 4 clips and remove the center pillar garnish lower LH.
REMOVE SEAT ASSEMBLY LH
Disconnect connector.
Remove the nut and 3 bolts.
Remove the seat assembly LH.
REMOVE CENTER PILLAR GARNISH LOWER LH (Semi Trim Type)
Remove the clip.
Using a screwdriver, disengage the 4 clamps and remove the center pillar garnish lower RH.
Tech Tips
Tape the screwdriver tip before use.
REMOVE BACK DOOR SCUFF PLATE (Full Trim Type)
Using a screwdriver, disengage the 7 clips and 4 claws and remove the back door scuff plate.
Tech Tips
Tape the screwdriver tip before use.
REMOVE BACK DOOR WEATHERSTRIP (Full Trim Type)
REMOVE QUARTER TRIM PANEL ASSEMBLY REAR LH (Full Trim and Middle Roof Type)
Using a screwdriver, disengage the 21 clips and remove the quarter trim panel assembly rear LH.
Tech Tips
Tape the screwdriver tip before use.
REMOVE QUARTER TRIM PANEL ASSEMBLY REAR LH (Full Trim and High Roof Type)
Using a screwdriver, disengage the 35 clips and remove the quarter trim panel assembly rear LH.
Tech Tips
Tape the screwdriver tip before use.
REMOVE SIDE NO.1 TRIM ASSEMBLY LH (Full Trim Type)
Using a screwdriver, disengage the 21 clips and remove the side No.1 trim assembly LH.
Tech Tips
Tape the screwdriver tip before use.
REMOVE COOLER CONTROL SWITCH KNOB
Remove the cooler control switch knob.
REMOVE HEATER SWITCH ASSEMBLY
Remove the 2 screws and heater switch assembly.