REAR BLOWER SWITCH (for Heater) REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE LH


    1. A01BGMI

      Remove the 5 clips and front door scuff plate LH.

  2. REMOVE FRONT DOOR OPENING TRIM LH

  3. REMOVE SEAT BELT ANCHOR COVER


    1. A01BB5PE01

      Remove the 2 clips.

    2. Disengage the claw and then remove the seat belt anchor cover.

  4. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH


    1. A01BF0I

      Remove the bolt and disconnect front seat outer belt assembly RH.

    2. A01BAR9E01

      Using a screwdriver, disengage the 2 claws and cover.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01BGXI

      Remove the bolt and disconnect front seat outer belt assembly RH.

  5. REMOVE CENTER PILLAR GARNISH COVER LOWER LH


    1. A01BBOJE01

      Using a screwdriver, disengage the 4 clips and remove the center pillar garnish lower LH.

  6. REMOVE SEAT ASSEMBLY LH


    1. Disconnect connector.

    2. A01BAVH

      Remove the nut and 3 bolts.

    3. Remove the seat assembly LH.

  7. REMOVE CENTER PILLAR GARNISH LOWER LH (Semi Trim Type)


    1. A01BBOJE01

      Using a screwdriver, disengage the 4 clips and remove the center pillar garnish lower LH.

  8. REMOVE BACK DOOR SCUFF PLATE (Full Trim Type)


    1. A01BBWNE01

      Using a screwdriver, disengage the 7 clips and 4 claws and remove the back door scuff plate.

      Tech Tips

      Tape the screwdriver tip before use.

  9. REMOVE BACK DOOR WEATHERSTRIP (Full Trim Type)

  10. REMOVE QUARTER TRIM PANEL ASSEMBLY REAR LH (Full Trim and Middle Roof Type)


    1. A01BHB3

      Using a screwdriver, disengage the 21 clips and remove the quarter trim panel assembly rear LH.

      Tech Tips

      Tape the screwdriver tip before use.

  11. REMOVE QUARTER TRIM PANEL ASSEMBLY REAR LH (Full Trim and High Roof Type)


    1. A01BFM6

      Using a screwdriver, disengage the 35 clips and remove the quarter trim panel assembly rear LH.

      Tech Tips

      Tape the screwdriver tip before use.

  12. REMOVE SIDE NO.1 TRIM ASSEMBLY LH (Full Trim Type)


    1. A01BFUT

      Using a screwdriver, disengage the 21 clips and remove the side No.1 trim assembly LH.

      Tech Tips

      Tape the screwdriver tip before use.

  13. REMOVE COOLER CONTROL SWITCH KNOB


    1. A01BB06

      Remove the cooler control switch knob.

  14. REMOVE HEATER SWITCH ASSEMBLY


    1. A01BDPC

      Remove the 2 screws and heater switch assembly.