AIRBAG SYSTEM CHECK MODE PROCEDURE


  1. CHECK MODE (SIGNAL CHECK): DTC CHECK


    1. A01BHY4E01

      Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to the ON position.

    3. Select the "SIGNAL CHECK", and proceed checking with the intelligent tester.

      Note

      Select the "SIGNAL CHECK" from the "DTC CHECK" screen displayed on the intelligent tester to clear the output DTCs (both present and past).

      Tech Tips


      • DTCs can be detected more sensitivity in check mode than in normal diagnosis mode.

      • Perform check mode inspection when a malfunction in each squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.