AIR CONDITIONING CONTROL ASSEMBLY REMOVAL


  1. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER


    1. A01BHMVE01

      Using a clip remover, remove the 2 clips (A).

    2. Disengage the 4 clips (B).

    3. Disconnect the connector.

    4. A01BHHW

      Push the positions indicated by the arrows in the illustration to separate the fuel lid lock control cable and bonnet (hood) control cable assembly from the panel.

      Remove the instrument panel finish lower.

  2. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1


    1. A01BE86

      Using a clip remover, remove the 2 clips

    2. Disengage the 3 claws and remove the instrument panel No.1 under cover sub-assembly.

  3. REMOVE PARKING BRAKE HOLE COVER


    1. A01BF1ME01

      Disengage the 6 claws and remove the parking brake hole cover.

  4. REMOVE SHIFT LEVER KNOB


    1. A01BAU7E01

      Turn the shift lever knob in the direction indicated by the arrow and remove it.

  5. REMOVE SHIFTING HOLE COVER ASSEMBLY


    1. A01BF5BE01

      Manual Transmission:

      Disengage the 6 claws and remove the shifting hole cover assembly.

    2. Automatic Transmission:

      Disengage the 8 claws and remove the shifting hole cover assembly.

  6. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER


    1. A01BB5ME01

      Disengage the 8 claws and remove the instrument panel finish panel lower center.

  7. REMOVE AIR CONDITIONER PANEL SUB-ASSEMBLY


    1. A01BF7ZE01

      Release the 9 clips and the air conditioner panel sub-assembly.

    2. Disconnect the connector and remove the air conditioner panel sub-assembly.

    3. A01BE9DE01

      Release clamp.

    4. Disengage the 2 claws and then remove the boost ventilator control cable sub-assembly.

    5. A01BGTGE01

      Disengage the 2 claws and then remove the defroster damper control cable sub-assembly.

    6. A01BFRJ

      Remove the 2 screws and remove the heater control hose.