HEATER SWITCH (w/ Hot Gas Heater) REMOVAL


  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER (for LHD)

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER (for RHD)


    1. A01BD8D

      Using a clip remover, remove the 2 clips.

    2. Detach the 4 clips and remove the instrument panel finish lower.

    3. Disconnect each connector.

    4. A01BHHW

      Push the positions indicated by the arrows in the illustration to disconnect the fuel lid lock control cable and bonnet (hood) control cable assembly from the instrument panel finish lower.

  3. REMOVE INSTRUMENT PANEL NO. 1 UNDER COVER SUB-ASSEMBLY (for RHD)


    1. A01BD77

      Using a clip remover, remove the 2 clips

    2. Detach the 3 claws and remove the instrument panel under cover sub-assembly No. 1.

  4. REMOVE PARKING BRAKE HOLE COVER (for RHD)


    1. A01BBGE

      Detach the 6 claws and remove the parking brake hole cover.

    2. Disconnect each connector.

  5. REMOVE SHIFT LEVER KNOB (for RHD)


    1. A01BFW4E01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      Turn the shift lever knob in the direction indicated by the arrow and remove it.

  6. REMOVE SHIFTING HOLE COVER ASSEMBLY (for RHD)


    1. A01BAT5E01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      for Manual Transmission:

      Detach the 6 claws and remove the shifting hole cover assembly.

    2. for Automatic Transmission:

      Detach the 8 claws and remove the shifting hole cover assembly.

  7. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER (for RHD)


    1. A01BGOPE01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      Detach the 8 claws and remove the instrument panel finish panel lower center.

  8. REMOVE HEATER SWITCH ASSEMBLY (w/ Hot Gas Heater)


    1. A01BBUK

      Detach the 2 claws and remove the heater switch assembly from the instrument cluster finish panel sub-assembly lower center.

  9. REMOVE IDLE UP SWITCH (w/o Hot Gas Heater)


    1. A01BFEB

      Detach the 2 claws and remove the idle up switch from the instrument panel finish panel lower center.