REAR COOLER RELAY ON-VEHICLE INSPECTION


  1. INSPECT REAR COOLER RELAY


    1. A01BB8N

      Remove the rear cooler relay from engine room R/B No.1.

    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester connection Condition Specified condition
      3 - 4 Always Below 1 Ω
      3 - 5 Always 10 kΩ or higher
      3 - 4 Battery voltage to terminals 1 and 2 10 kΩ or higher
      3 - 5 Battery voltage to terminals 1 and 2 Below 1 Ω

      If the resistance value is not as specified, replace the rear cooler relay.