FRONT BLOWER RESISTOR INSPECTION


  1. INSPECT FRONT BLOWER RESISTOR


    1. A01BDSQE03

      Remove the front blower resistor and disconnect the connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester connection Condition Specified condition
      1 - 4 Always 1.57 to 1.81 Ω
      3 - 4 Always 0.64 to 0.74 Ω
      2 - 4 Always 0.20 to 0.24 Ω

      If the resistance value is not as specified, replace the front blower resistor.