REAR COOLING UNIT (for Integrated Blower Motor Fan Type) REMOVAL


  1. REMOVE ROOF NO. 1 HEADLINING (for Semi-trim)

    Tech Tips

    Refer to the instruction for removal of the roof headlining. Click here

  2. REMOVE ROOF NO. 1 HEADLINING (for Full-trim)

    Tech Tips

    Refer to the instruction for removal of the roof headlining. Click here

  3. DISCONNECT COOLER UNIT NO. 2 DRAIN HOSE


    1. A01BGVW

      Disconnect the cooler unit No. 2 drain hose.

  4. DISCONNECT COOLER UNIT NO. 3 DRAIN HOSE


    1. A01BGXX

      Disconnect the cooler unit No. 3 drain hose.

  5. REMOVE COOLER REFRIGERANT HOSE NO. 1 INSULATOR


    1. A01BDZK

      Remove the cooler refrigerant hose No. 1 insulator.

  6. REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY (except Super Long Wheelbase)


    1. A01BB11

      Remove the 2 bolts and disconnect the air conditioning tube and accessory assembly.

    2. Remove the O-ring from the air conditioning tube and accessory assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  7. REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY (for Super Long Wheelbase)


    1. A01BCQ9

      Loosen the 2 union nuts and disconnect the air conditioning tube and accessory assembly.

      Note

      Do not apply excessive force to the pipes.

    2. Remove the O-ring from the air conditioning tube and accessory assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  8. REMOVE REAR COOLING UNIT


    1. A01BFO1

      Disconnect the connector.

    2. Remove the 5 bolts and rear cooling unit.