| Warm air does not flow immediately after engine start with temperature control dial at max. hot |
1. Troubleshooting flow chart |
Click here
|
| Cabin temperature does not drop |
1. Troubleshooting flow chart |
Click here
|
| Air flow control: No blower operation |
1. Blower resistor |
Click here
|
| 2. Blower motor |
Click here
|
| 3. Front blower switch |
Click here
|
| 4. Wire harness or connector |
- |
| Air flow control: No blower control |
1. Blower resistor |
Click here
|
| 2. Front blower switch |
Click here
|
| 3. Wire harness or connector |
- |
| Does not operate compressor operate |
1. CAN communication system |
Click here
|
| 2. Volume of refrigerant |
Click here
|
| 3. Refrigerant pressure |
Click here
|
| 4. Air mix damper control switch |
Click here
|
| 5. Pressure sensor (1KD-FTV, 2KD-FTV, 2TR-FE) |
Click here
|
| 6. Pressure switch (5L-E) |
Click here
|
| 7. Evaporator temperature sensor |
Click here
|
| 8. w/ pulley compressor assembly (1KD-FTV, 2KD-FTV) |
Click here
|
| 9. w/ pulley compressor assembly (5L-E) |
Click here
|
| 10. w/ pulley compressor assembly (2TR-FE) |
Click here
|
| 11. ECM (1KD-FTV, 2KD-FTV) |
Click here
|
| 12. ECM (5L-E) |
Click here
|
| 13. ECM (2TR-FE) |
Click here
|
| 14. Wire harness or connector |
- |