AIR CONDITIONING SYSTEM SYSTEM DESCRIPTION


  1. GENERAL


    1. Air Conditioning Unit


      • The air conditioner unit has been made compact and lightweight by placing the evaporator and the heater core horizontally, above and below in the unit, and adopting a film type slide door for the air mix door.

      • An RS evaporator (RS: Revolutionary Super Slim), which is thin and lightweight and has excellent cooling performance, is used.

      • An SFA-II heater core (SFA-II: Straight Flow Aluminum-II), which is compact and lightweight and has superior heating performance, is used in the front heater & cooler unit and the rear heater unit.

      • Heater doors that always recirculate some of the inside air even in refresh mode are used for models with the front air conditioner unit to improve the heating performance.

      • The PTC (Positive Temperature Coefficient) heater system contains a PTC heater that heats the air that has passed through the heater core to ensure the proper heater performance.

    2. Other Equipment


      • The previous air conditioner compressor continues to be used on the diesel engine models, and an external control continuously variable capacity air conditioner compressor is used on the 2TR-FE engine models.

      • The heater control panel is the rotary switch type. A rotating cable control mechanism is used to make the control unit more compact.

  2. MODEL POSITION AND DAMPER OPERATION

    A01BG7ZE01
    Control Damper Control Position Damper Position Operation
    Air Inlet Control Damper FRESH B Brings in fresh air.
    RECIRC A Recirculates internal air.
    Air Mix Control Film Damper Driver and Front Passenger Side

    MAX COOL to MAX HOT

    (TEMP. SETTING 18 to 32°C (64 to 90°F))

    		 C, D, E Varies the mixture ratio of the fresh air and the recirculation air in order to regulate the temperature continuously from HOT to COOL.
    Mode Control Film Damper Driver and Front Passenger Side

    FACE

    A01BBT7     		I, J, M, O, S Air blows out of the front and rear center registers, and side registers.

    BI - LEVEL

    A01BHEF     		I, J, M, P, S Air mainly blows out of the front and rear center registers, side registers, and footwell register ducts.

    FOOT

    A01BI5N     		I, J, Q, L, S

    Air mainly blows out of the front and rear footwell register ducts.

    In addition, air blows out slightly from the front and side defrosters, and the side registers.

    FOOT / DEF

    A01BGXJ     		I, J, N, L, S Air mainly blows out of the front and side defrosters to defrost the windshield. Air also blows out from the front and rear footwell register ducts, and the side registers.

    DEF

    A01BHVI     		I, J, N, O, S Air blows out of the front and side defrosters and side registers to defrost the windshield.

  3. AIR OUTLETS AND AIRFLOW VOLUME

    A01BEN8E01
    Air Outlet Mode A B C D E F
    Center Face Side Face Foot Foot Center Defroster Side Defroster

    FACE

    A01BBT7

    187BE24

    		 A01BDT9 A01BDT9 A01BBMJ A01BBMJ A01BBMJ A01BBMJ

    BI-LEVEL

    A01BHEF

    187BE25

    		 A01BF3L A01BF3L A01BF3L A01BI3P A01BBMJ A01BBMJ

    FOOT

    A01BI5N

    187BE26

    		 A01BBMJ A01BF3L A01BDT9 A01BF3L A01BF3L A01BF3L

    FOOT/DEF

    A01BGXJ

    187BE27

    		 A01BBMJ A01BF3L A01BF3L A01BI3P A01BF3L A01BI3P

    DEF

    A01BHVI

    187BE28

    		 A01BBMJ A01BF3L A01BBMJ A01BBMJ A01BDT9 A01BF3L

    Tech Tips

    The size of the circle indicates the proportion of airflow volume. There are 4 sizes.