STEERING TORQUE SHAFT INSTALLATION


  1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  2. INSTALL STEERING SLIDING YOKE SUB-ASSEMBLY


    1. A01BEH3E01

      Align the matchmarks on the steering sliding yoke sub-assembly and the steering torque shaft assembly.

    2. Temporarily tighten the bolt.

      Tech Tips

      Do not torque the bolt.

  3. INSTALL STEERING TORQUE SHAFT ASSEMBLY


    1. A01BCE2E01

      Align the matchmarks on the steering torque shaft assembly and the steering bevel gear assembly.

    2. A01BE29

      Install the bolt.

      Torque:
      35 N*m  { 360 kgf*cm, 26 ft.*lbf }
    3. A01BG7RE01

      Align the matchmarks on the steering torque shaft assembly and the power steering link assembly.

    4. A01BH0EE01

      Install bolt (B) and tighten the 2 bolts.

      Torque:
      35 N*m  { 360 kgf*cm, 26 ft.*lbf }

  4. INSTALL ENGINE UNDER COVER NO.1